how to check amps in multimeter

How to Check Amps with a Multimeter: A Step-by-Step Guide

By Hannah Anderson
AD

Ever found yourself in a situation where you need to troubleshoot an electronics project or diagnose a fault in a circuit, but lacked the tools to measure amperage accurately? A multimeter is an essential tool that every electronics enthusiast should have in their kit. It's a versatile device that can measure voltage, resistance, and current, among other things. So, let's dive into how to check amps in a multimeter, making your DIY projects and fault-finding missions a breeze.

Before we proceed, let's ensure you're working with a multimeter that supports current measurements. Not all multimeters are created equal, and not all can measure current. Look for a multimeter with an 'A' setting or amps logo on its dial. If it's not explicitly stated, check the user manual or consult the manufacturer to be sure.

Understanding Amperage Measurements

The first step in checking amps with your multimeter is understanding what you're measuring. Amperage, or current, is the rate of flow of electric charge, typically measured in Amperes (A). It's like the flow of water in a pipe; the more water (electric charge) flows, the higher the amperage (flow rate).

AD
How to Measure Amps with a Multimeter (2-Part Guide)
How to Measure Amps with a Multimeter (2-Part Guide)
an image of a multimeter with instructions
an image of a multimeter with instructions
How to Check 220 Voltage With a Multimeter?
How to Check 220 Voltage With a Multimeter?

The key thing to remember is that amperage is a measure of how much electrical 'stuff' is flowing through a conductor at any given moment. When you use your multimeter to measure current, you're essentially quantifying this flow.

majoria Types of current Measurements

Your multimeter can measure two types of current: direct current (DC) and alternating current (AC). DC is the type of electrical flow you get from batteries, and AC is what you have in your home's electrical outlets. Most multimeters have separate settings for DC and AC, so ensure you're using the correct one for your application.

Analog Multimeter and Their Parts Names | Electrical Measurement Guide for Students
Analog Multimeter and Their Parts Names | Electrical Measurement Guide for Students
Multimeter Symbols Explained: What Each Setting Means
Multimeter Symbols Explained: What Each Setting Means

Additionally, multimeters can measure current in two ways: through a low-certainty or high-certainty connection. The low-certainty connection uses the multimeter's built-in probes to measure current, while the high-certainty connection involves disconnecting the circuit and placing the multimeter in series with the conductor. For safety and accuracy, always use the high-certainty method when available.

Safety First: Disconnect and Short

Before you start measuring current, ensure you've properly disconnected your circuit from the power source. Always prioritize safety when working with electricity. After disconnecting the power, short across the terminals to discharge any stored energy in capacitors, especially in power supplies and high-voltage circuits.

AD

Once you've taken these safety precautions, you're ready to connect your multimeter to the circuit. Remember, when measuring current, the multimeter becomes part of the circuit. So, ensure you're using an appropriately rated fuse to protect both your multimeter and yourself from excessive current.

Measuring Amperage with Your Multimeter

Now that you understand what you're measuring and how to ensure your safety let's get into the nuts and bolts of using your multimeter to measure amperage.

First, set your multimeter to the correct current scale. Multimeters typically offer a range of current scales, such as 200µA, 2mA, 20mA, and 10A. Choose the scale closest to the expected amperage in the conductor you're testing. If your multimeter isn't autoranging, you'll have to guess and check to find the correct scale.

AD

Connecting Your Multimeter in Series

To measure current, connect your multimeter in series with the circuit using a high-certainty connection. This involves disconnecting one of the wires in the circuit (make sure it's safely disconnected from power), then reconnecting it through the multimeter.

To do this, follow these steps:

  1. Disconnect the wire from the circuit.
  2. Strip the wire's insulation, exposing the conductor.
  3. Connect the wire to the COM (common) jack on your multimeter.
  4. Insert the red probe into the current jack (usually labeled 'mA' or '∀').
  5. Connect the red probe to the circuit, completing the series connection.

Reading and Interpreting the Results

After connecting your multimeter, turn the power back on to the circuit, and observe the reading on the display. The displayed value is the amperage flowing through the conductor at that moment. Make sure you record this value and, if necessary, compare it to the expected amperage for your circuit.

AD

If your circuit is consuming more current than expected, there might be a short circuit or a component drawing too much power. Conversely, if it's consuming less current than expected, there could be an open circuit or a component not functioning correctly. Always remember to turn off the power before making changes to the circuit to maintain safety.

Using your multimeter to check amps is a potent tool in your DIY toolbox. It allows you to gain insights into the behavior of your circuits and diagnose potential issues. So next time you reach for your multimeter, remember the valuable role it plays in checking amps, and use it to take your electronics projects to the next level.

AD