How to Change WiFi Name & Password
Every now and then, you might want to change the name (SSID) or password of your Wi-Fi network. Perhaps you've moved into a new neighborhood with similar network names, or maybe you're concerned about security and want to update your password. Whatever the reason, it's a straightforward process that we'll guide you through here. In this article, we'll look at how to change your Wi-Fi name and password on two common routers - Linksys and Netgear.
Before we dive in, ensure you have admin access to your router. You'll need to know your current password and have physical access to the router. Additionally, changing your Wi-Fi password will log off all connected devices, so have them ready to reconnect.
Changing Wi-Fi Name and Password on a Linksys Router
Linksys routers use a web-based interface, which we'll guide you through.
**Note that the exact interface may vary depending on your router model. However, the general steps remain the same.**
Access the Router's Web Interface
Open a web browser on any device connected to your network. In the address bar, type Router IP address (usually 192.168.1.1) and press Enter.
Enter your router's admin password when prompted. If you've changed it before, use that. If not, the default password is likely 'admin'.
Change Wi-Fi Network Name and Password
In the router's interface, navigate to the 'Wireless' or 'Wi-Fi' tab. Here, you'll see the current settings for your network name (SSID) and password.
To change the SSID (network name): Enter your desired new name in the 'Network Name' or 'SSID' field. Click 'Save Settings' or 'Apply'.
To change the password: Enter a new, strong password in the 'Password' or 'Passphrase' field. Ensure it's a combination of uppercase and lowercase letters, numbers, and symbols. Click 'Save Settings' or 'Apply'.
Your Linksys router should now reboot, and your Wi-Fi name and password should be updated.
Changing Wi-Fi Name and Password on a Netgear Router
Netgear routers also use a web-based interface, but the layout and process differ slightly from Linksys.
Access the Router's Web Interface
This process is similar to the one above. Open a web browser, enter your router's IP address (usually 192.168.1.1), and log in with your admin password.
Change Wi-Fi Network Name and Password
In the Netgear interface, click on 'Wireless' or 'Wi-Fi' in the left-hand menu. Here, you'll see your current network name (SSID) and password.
To change the SSID: Enter your desired new name in the 'Network Name' field. Click 'Apply'.
To change the password: Enter a new, strong password in the 'Password' field. Click 'Apply'.
Your Netgear router should now reboot, and your Wi-Fi name and password should be updated.
One final tip: **cycle throughyour Wi-Fi name and password periodically**, especially if you've detected any unauthorized access. This adds an extra layer of security to your network.