how to change water filter maytag refrigerator

Step-by-Step: How to Change Water Filter in Maytag Refrigerator

By Mark Robinson
AD

Tired of that stale water taste from your Maytag refrigerator? Let's freshen things up by changing out that old filter. Don't worry, this is a simple task that won't take much time and effort. Let's dive into a step-by-step guide on how to change the water filter in your Maytag refrigerator.

Before we get started, make sure you have your new replacement filter on hand. Maytag recommends changing the filter every 30 to 60 days, but it's always a good idea to check your owner's manual for specific details about your model.

Preparation

Prior to changing the filter, ensure your refrigerator's water dispenser is in the "Off" position. Empty any remaining water from the dispenser's trough to avoid leaks during the process.

AD
How to Replace Your Refrigerator Water Filter | Maytag
How to Replace Your Refrigerator Water Filter | Maytag
How To Reset Change Filter Light - Jenn-Air (Maytag) Refrigerator Water & Ice Filter
How To Reset Change Filter Light - Jenn-Air (Maytag) Refrigerator Water & Ice Filter
How to Replace Your Refrigerator Water Filter
How to Replace Your Refrigerator Water Filter

Slide out your Maytag refrigerator's bottom two drawers, providing enough space for access to the water filter housing, usually located at the far right at the bottom of the refrigerator compartment.

Accessing the Filter Housing

Locate the water filter housing, which should be a circular or rectangular opening with a small button or lever near it. For Maytag's push-to-release models, press and hold the button while turning the filter counterclockwise. For twist-to-release models, simply turn the filter clockwise.

How To Change Ice Maker Filter On Whirlpool – Storables
How To Change Ice Maker Filter On Whirlpool – Storables
How To Change The Water Filter In A Samsung Refrigerator and Reset Water Filter Light
How To Change The Water Filter In A Samsung Refrigerator and Reset Water Filter Light

For models with a protective cap, twist and remove the cap by turning it counterclockwise, then locate and remove the filter by turning it counterclockwise as well.

Removing the Old Filter

Once the filter housing is exposed, firmly grasp the filter using both hands. For push-to-release models, continue pressing the button while turning the filter counterclockwise. For twist-to-release models, turn the filter counterclockwise until it stops.

AD

The filter will turn smoothly. If you feel resistance, stop immediately to avoid breaking the filter or damaging the housing. If needed, gently pull straight out on the filter once it's turned to release it from the housing.

Installing the New Filter

Now that the old filter is out, take your replacement filter and locate the serial number and arrow markings. The arrow should point in the direction of the water flow, typically marked on the filter housing or in your owner's manual.

Ensure the serial number on the new filter matches the model and serial number printed on the refrigerator door, again, check your owner's manual for verification.

AD

Aligning and Inserting the New Filter

Align the arrow on your new filter with the direction of the water flow, then firmly but gently push the filter into the housing while turning it clockwise. For push-to-release models, the filter should screw in easily until it clicks into place. For twist-to-release models, continue turning until it stops.

Once the new filter is securely fastened, reattach the protective cap (if applicable) by turning it clockwise. Replace any buttons or levers you may have removed, ensuring they're securely in place.

Priming the New Filter

With the drawer fully extended, press and hold the water dispenser lever to prime the new filter. If you have a filter light, it should now show "filter OK." Let the water dispense for about 3 minutes to ensure the new filter is fully primed. If your refrigerator has a filter status indicator, check that it shows a green or blinking green light to indicate the filter is ready for use.

AD

Congratulations! You've successfully changed the water filter in your Maytag refrigerator. Regularly maintaining your filters keeps your water fresh and helps prevent unwanted odors and tastes. Enjoy your potable water, and remember to monitor and change your filter regularly for optimal performance.

AD