How to Replace Your Water Filter in a Whirlpool French Door Refrigerator
Keeping your Whirlpool French door refrigerator running efficiently and ensuring your family's drinking water is pure and fresh starts with regular water filter replacements. But with the fridge door hinged on the sides, finding and changing the filter can seem daunting. Don't worry, we've got you covered with this step-by-step guide on how to change the water filter in your Whirlpool French door refrigerator.
The first thing you'll notice about your Whirlpool French door fridge is that the water filter is cleverly hidden behind the lower right kickplate. But, don't let that deter you; we'll guide you through the process, ensuring you change the filter correctly and safely.
Preparation: Gathering Necessary Tools and Materials
Before you start, ensure you have the correct Whirlpool water filter – W10295370A – on hand. Also, gather these tools to help with the process:
- A new Whirlpool EveryDrop water filter (W10295370A)
- Flathead screwdriver
- Pair of kitchen gloves (optional, for a better grip)
Locating the Water Filter
Finding the water filter in your Whirlpool French door refrigerator is quite straightforward once you know where to look.
1. Begin by unplugging the refrigerator from the power source to ensure safety during the process. Move the fridge out from the wall slightly for better access to the back.
Removing the Kickplate
Now that you've located the water filter, let's remove the kickplate to access it.
1. Using your flathead screwdriver, gently pry off the lower right kickplate from your Whirlpool French door refrigerator. You'll find this kickplate near the bottom front of the refrigerator, next to the doors.
2. Once you've removed the kickplate, you'll see the water filter hiding behind it. Before proceeding, ensure you have your new filter (W10295370A) ready.
Changing the Water Filter
With the kickplate removed and the old filter exposed, you're ready to change it. Follow these steps to install the new water filter correctly:
Removing the Old Filter
Removing the old filter is an easy, twist-and-pull process.
1. Turn the water filter lid in a counterclockwise direction to loosen and remove it.
2. With the lid removed, twist the old filter in a counterclockwise direction to unlock it from the water supply line. Then, pull it out gently.
Installing the New Filter
Now that the old filter is out, it's time to install the new one. Here's how to do it:
1. Insert the new W10295370A filter into the water filter housing. Ensure the arrow indicated on the filter aligns with the arrow on the housing.
2. Rotate the filter in a clockwise direction until you feel it lock into place. Tighten it firmly by hand, but avoid overtightening.
3. Replace the water filter lid by turning it clockwise until it locks into place.
Reset the Filter Indicator Light and Test the Water Quality
With the new filter installed, it's time to reset the filter indicator light and test the water quality.
Resetting the Filter Indicator Light
1. Press and hold the "Light" touch point on the control panel for about 3 seconds. Release the touch point when the light begins to blink.
2. Press the light touch point once to turn off the light. The filter indicator light should now be reset.
Testing the Water Quality
To ensure your new filter is working correctly, run some water through the dispenser. Discard the first few cups, as these may still contain some impurities flushed from the old filter. Then, fill a clean glass with water and enjoy the fresh taste.
Congratulations! You've successfully replaced the water filter in your Whirlpool French door refrigerator. Regular water filter changes ensure clean, fresh water for your family and maintain the efficiency of your refrigerator. Don't forget to set a reminder to change the filter every six months, or as recommended by Whirlpool. Happy filtered water enjoyment!