how to change water filter in frigidaire

Easy Step-by-Step Guide: How to Change Water Filter in Frigidaire

By Mark Thompson
AD

Is your refrigerator's water tasting off, or perhaps the flow has slowed down? It might be time to change your Frigidaire water filter. Don't worry, it's a quick and easy process that you can do at home. In this guide, we'll walk you through step-by-step how to change your Frigidaire water filter, ensuring your water remains fresh and clean.

Regularly changing your water filter is crucial to maintain the quality and safety of your drinking water. Frigidaire recommends changing filters every 6 months or 200 gallons, whichever comes first. Let's dive into the process.

Preparing to Change Your Frigidaire Water Filter

Before you start, you'll need to gather the following items:

AD
How To: Replace The Water Filter in Your Frigidaire Refrigerator Using Filter Model ULTRAWF
How To: Replace The Water Filter in Your Frigidaire Refrigerator Using Filter Model ULTRAWF
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
Replace a Fridgaire PureSource ULTRA water and air filter
Replace a Fridgaire PureSource ULTRA water and air filter
  • New Frigidaire water filter (ensure it's compatible with your model)
  • Flathead screwdriver
  • New filter installation kit (if included with your new filter)

Have these items ready and follow these steps to proceed:

Locating Your Water Filter

First, you need to find your water filter. Its location depends on your Frigidaire refrigerator model.

How to change your fridge water filter (Installation Instructions for 17 Great Brands) - I'll Just Fix It Myself
How to change your fridge water filter (Installation Instructions for 17 Great Brands) - I'll Just Fix It Myself
DIY Refrigerator Water Filter Replacement (Beginner-Friendly Tutorial)
DIY Refrigerator Water Filter Replacement (Beginner-Friendly Tutorial)
  • In older models, the filter is usually behind the bottom access panel.
  • In newer models, the filter is often located behind the bottom grille, near the base of the unit.

Consult your Frigidaire manual if you're unsure about your specific model.

Preparing Your New Filter

Remove your new filter from its packaging and rinse it under cold water for about 10 seconds. This step is essential to remove any manufacturing debris from the filter.

AD

Check if your new filter came with a filter installation kit. If it did, remove the red cap from the filter by twisting it counterclockwise. Keep this cap, as you'll need it later.

Removing Your Old Water Filter

Now that you've located your old filter and prepared your new one, it's time to remove the old filter. Here's how:

Turning Off the Water Supply

First, turn off the water supply valve to prevent any leaks or mess. The valve is usually located behind the bottom grille or access panel, near the filter.

AD

Releasing any Residual Pressure

After turning off the water supply, open the refrigerator door and let any residual water in the line drain out. This step is crucial to avoid damaging your new filter.

Removing the Old Filter

Now, it's time to remove the old filter. Reach behind the access panel or grille and locate the filter. Twist the old filter counterclockwise and pull it out slowly. You might need to use a flathead screwdriver to help you remove it.

Installing Your New Water Filter

With the old filter removed, it's time to install your new one. Follow these steps:

AD

Aligning the New Filter

Insert your new filter into the filter housing. Make sure the arrows on the filter point towards the refrigerator (in the direction of water flow).

Securing the New Filter

Once the new filter is aligned, twist it clockwise until it's firmly in place. You should feel a slight resistance as you do this. Be careful not to overtighten the filter, as this could damage it.

If you're using a filter installation kit, snap the red cap back onto the filter, following the directions provided in the kit.

Priming the New Filter

After installing the new filter, you need to prime it to remove any remaining air from the system. Here's how:

Turning On the Water Supply

Slowly turn the water supply valve back on. You should hear water flowing through the line.

Flushing the System

Turn on the refrigerator's dispenser or door-mounted water bottle filling line. Run the water until it flows strongly and consistently. This step ensures that any air in the system is expelled, and your new filter is primed and ready for use.

Congratulations! You've successfully changed your Frigidaire water filter. Remember to note down the date of the filter change and keep an eye on the new filter's lifespan to ensure you change it when needed.

By following these steps and changing your water filter regularly, you'll ensure your Frigidaire refrigerator continues to provide clean, fresh, and great-tasting water. Happy hydrating!

AD