Step-by-Step: Change Frigidaire French Door Water Filter
Replacing the water filter in your Frigidaire French door refrigerator isn't as daunting as it might seem. Regular filter changes ensure fresh, great-tasting water and ice, and it's a simple task you can do at home. This step-by-step guide will walk you through the process, making it easy for you to maintain your refrigerator's water system.
Before you start, make sure you have the replacement filter on hand. For Frigidaire French door refrigerators, you'll need a filter certified to meet NSF/ANSI Standard 42 and 53, like the FRIGIDAIRE® Ultrasonic II™ Replacement Water Filter (EA4DWRU01).
Preparation
To make the filter change process smooth, it's essential to gather the necessary tools and prepare your refrigerator.
Tools you'll need:
- Replacement filter
- Filter wrench (included with the replacement filter)
- Towel or tray to catch any water
Locating the Filter
The water filter cartridge is usually located inside the fresh food compartment, behind the lower right corner of the shelf. It may be disguised as a panel, requiring you to remove it to access the filter.
In some Frigidaire French door models, the filter is located in the dispenser panel. Check your refrigerator's owner's manual for the exact location of your filter.
Removing the Old Filter
To remove the old filter, follow these steps:
- Turn off the water supply to the refrigerator by closing the shutoff valve located under the sink or behind the refrigerator.
- Remove the panel covering the filter by turning it counterclockwise or by pressing the release button, depending on your refrigerator model. Some models may require using the filter wrench.
- Turn the old filter counterclockwise to release it from the mounting. You may need to use the filter wrench for this step.
- Remove the old filter from the compartment and discard it properly.
Installing the New Filter
Now that you've removed the old filter, it's time to install the new one. Follow these steps:
Tools you'll need:
- Replacement filter
- Filter wrench
- Towel or tray to catch any water
Preparing the New Filter
Before installing the new filter, prepare it by following these steps:
- Remove the protective cap from the new filter by unscrewing it counterclockwise.
- Rinse the new filter under cold water for about 10 seconds to remove any residual taste or contaminants.
Installing the New Filter
Now that the new filter is prepared, follow these steps to install it:
- Ensure the water supply to the refrigerator is still turned off.
- Rotate the new filter clockwise while holding the filter housing with the filter wrench to secure it. It should take about 1.5 to 2 full turns to tighten.
- Replace the cover panel by turning it clockwise or pressing the release button, depending on your refrigerator model.
- Turn the water supply back on and flush the system to remove any trapped air and activate the new filter. To do this, dispense water and/or ice for about 3 minutes, discarding the water.
Congratulations! You've successfully changed the water filter in your Frigidaire French door refrigerator. By following this simple guide, you've ensured that your refrigerator provides clean, fresh-tasting water for months to come. Remember to replace the filter every six months or according to your refrigerator's recommended replacement schedule for optimal performance. Enjoy your fresh, clean water!