how to change tracks on a skid steer

How to Switch Tracks on a Skid Steer

By Laura Clark
AD

Operating a skid steer loader can be a breeze once you're familiar with its controls. One common task is changing tracks, but this can be daunting for new operators. In this guide, we'll walk you through the process in a clear, step-by-step manner, ensuring you're confident and safe when operating your skid steer.

Before we delve into changing tracks, let's ensure you're comfortable with your skid steer's controls. Familiarize yourself with the throttle, steering levers, lift arm control, and attachment buttons. Safety first: always wear appropriate personal protective equipment (PPE), including a helmet, gloves, and safety glasses. Now, let's get started.

Preparing to Change Tracks

Ensure your skid steer is parked in a safe, level area to minimize any risks. It's crucial to maintain stability during track changes to prevent accidents. Orient your skid steer so you can access the tracks easily.

AD
How to Operate a Skid Steer (2020) Pre-Op to Shut Down| Skid Steer Loader Training
How to Operate a Skid Steer (2020) Pre-Op to Shut Down| Skid Steer Loader Training
Testing a TracK changing tool on the cat skid steer
Testing a TracK changing tool on the cat skid steer
How-to Install Skid Steer Tracks | Skid Steer Solutions
How-to Install Skid Steer Tracks | Skid Steer Solutions

Before you begin, check the amount of fuel in your skid steer. You won't need much fuel to change tracks, but you should have enough to complete the task safely. If you're running low, consider topping up the fuel tank.

Lock the Lift Arm

Before disengaging the tracks, you must lock the lift arm to prevent any unwanted movement. Look for the lift lock lever on your skid steer. It's usually located near the lift arm control. Pull the lever up to engage the lock, ensuring the lift arm is secured. Attempting to change tracks with an unlocked lift arm can lead to serious safety hazards.

6th Day of Construction Gifts: Skid Steer Solutions Track Change Tool
6th Day of Construction Gifts: Skid Steer Solutions Track Change Tool
Making Skid Steer Driving System (Tracks)
Making Skid Steer Driving System (Tracks)

Ensure the lock is engaged by trying to lift the arm. If it doesn't move, you've successfully locked it. Double-check to avoid any potential mishaps during track replacement.

Disengage the Tracks

The next step is disengaging the tracks from the undercarriage. Each skid steer model may vary slightly, so consult your machine's manual for specific instructions. Generally, you'll find levers on either side of the skid steer that release the tracks from the undercarriage.

AD

Engage the service brakes, then pull the levers to disengage the tracks. You should feel them disconnect, and the tracks should move freely. Be cautious of any debris that may have accumulated around the undercarriage and could pose a hazard.

Replacing the Tracks

Now that the old tracks are disengaged, you can start preparing to install the new ones. Position the replacement tracks parallel to your skid steer, with the drive lugs facing outwards. This will ensure they engage correctly with the undercarriage.

Before installing the new tracks, inspect them for any visible defects or damage. Once satisfied with the condition of your tracks, you're ready to move on to the installation process.

AD

Installing the New Tracks

To install the new tracks, first, align the first track with the undercarriage, ensuring the drive lugs on both the track and undercarriage are properly engaged. You may need to adjust the track's position slightly to achieve this. Once aligned, firmly push the track onto the undercarriage using your hands or a pry bar.

After successfully installing the first track, align and install the second track in the same manner. Verify that both tracks are correctly engaged with the undercarriage and fit snugly against it. At this point, your skid steer should look ready for operation, but there's still one crucial step to complete.

Greasing the Tracks

Greasing the tracks is vital for maintaining proper function and extending their lifespan. Locate the grease nipples on the track's idlers and tensioners. Apply grease evenly, using the recommended amount specified in your skid steer's manual. Greasing ensures that the tracks move smoothly and reduces wear and tear on both the tracks and undercarriage components.

AD

After greasing the tracks, your skid steer is ready for operation. Engage the service brakes and slowly test the tracks by moving the skid steer forward and backward. Ensure the tracks move freely and engage correctly with the undercarriage. If everything feels right, you've successfully completed the track-changing process.

Regularly inspect your skid steer's tracks for any signs of wear or damage. This proactive approach will help prevent unexpected breakdowns and keep your machine running smoothly. Happy operating!

AD