how to change the belt on a maytag washer

Step-by-Step: Changing Your Maytag Washer's Belt

By Joshua Garcia
AD

Is your Maytag washer performing poorly due to a slipped or broken belt? Replacing the belt is a straightforward DIY task that can save you time and money. In this comprehensive guide, we'll walk you through the step-by-step process of how to change the belt on a Maytag washer. Before we dive in, ensure you have the right replacement belt for your washer model.

First, let's familiarize ourselves with the types of belts used in Maytag washers. Generally, you'll find either a single V-belt or two flat belts powering your unit. The type of belt needed depends on your machine's model and age. Consult your user manual or look up your washer's model online to determine the correct belt type.

Preparation and Disassembly

Successfully changing your Maytag washer's belt begins with a thorough preparation. Gather all necessary tools and ensure you understand theprocess before you start. This will save you time and potential frustration.

AD
How to Replace 211124, 211125 Maytag Washer Belt | www.goodappliancesuperstore.com
How to Replace 211124, 211125 Maytag Washer Belt | www.goodappliancesuperstore.com
The Hidden Signs Your Washing Machine Belt Needs Replacing
The Hidden Signs Your Washing Machine Belt Needs Replacing
Replace Whirlpool/KitchenAid/Maytag Washer Belt WPW10388414 - Easy DIY Guide
Replace Whirlpool/KitchenAid/Maytag Washer Belt WPW10388414 - Easy DIY Guide

To begin, unplug your washer from the electrical outlet and turn off the water supply valves. Make sure the washer is empty by removing any remaining laundry. Now, you're ready to access the belt. Follow these steps to disassemble your washer:

Accessing the Belt

To reach the belt, you'll need to remove certain panels from your Maytag washer. The process varies slightly depending on the model, but generally, you'll need to:

Changing a washing machine belt
Changing a washing machine belt
OLD MAYTAG DRYER BELT REPLACEMENT
OLD MAYTAG DRYER BELT REPLACEMENT
  • Remove the control panel by prying it off using a putty knife or flathead screwdriver.
  • Loosen and remove the screws securing the top panel, then lift it off.
  • With the top panel removed, you should now have access to the belt.

Removing the Old Belt

With the panels removed, locate the belt tensor. This is a small, spring-loaded mechanism that keeps the belt taut. You'll need to release the tension to remove the old belt. Here's how:

  1. Using an adjustable wrench, turn the pulley on the belt tensor counter-clockwise to release the tension.
  2. Once the tension is released, you can remove the old belt from the pulleys.

If the belt is severely damaged or difficult to remove, you may need to use a flathead screwdriver or a similar tool to help pry it off the pulleys.

AD

Installing the New Belt

With the old belt removed, it's time to install the new one. Ensure you have the correct replacement belt for your washer model to avoid compatibility issues. Wrap the new belt around the motor pulley and the transmission pulley, bringing the two ends together.

Before installing the new belt, double-check that the belt is positioned correctly on each pulley. The teeth on the belt should mesh with the grooves on the pulley. Once you're sure the belt is aligned correctly, follow these steps to secure it:

Securing the Belt

To secure the new belt, you'll need to re-engage the belt tensor. Follow these steps to reapply the proper tension:

AD
  1. Thread one end of the belt through the slot in the belt tensor.
  2. Using an adjustable wrench, turn the pulley on the belt tensor clockwise to apply tension to the belt.
  3. As you tighten the belt tensor, ensure the belt is evenly tensioned and not overstretched. Refer to your user manual for the exact tension specifications.
  4. Once the belt is properly tensioned, secure the belt tensor in place.

The belt should now be securely fastened, and your Maytag washer ready for use. However, there are a few final steps to complete before you can run a load of laundry:

Reassembling the Washer

With the new belt installed, it's time to put your Maytag washer back together. Follow the reverse order of disassembly to secure all panels and the control panel. Make sure everything is properly aligned and screwed back into place.

Once your washer is fully reassembled, reconnect the water supply hoses and turn the water valves back on. Plug your washer back into the electrical outlet. Before running a load, perform a test cycle to ensure the belt is functioning correctly and your Maytag washer is back in working order.

AD

Regularly maintaining your Maytag washer, including replacing the belt when necessary, will extend its lifespan and keep it running smoothly. If you find yourself faced with a more complex repair or are unsure about any part of the process, don't hesitate to consult a professional technician.

Happy washing! Remember, maintaining your washer doesn't stop at the belt. Keep an eye on other components, such as the drain pump and lid switch, to ensure your machine continues to serve you well.

AD