how to change ryobi weed eater line

How to Quickly Change Ryobi Weed Eater Line

By Thomas Harris
AD

Does your Ryobi weed eater seem to be struggling with cutting weeds? The issue might be that the line is worn out and needs replacement. Changing the line on your Ryobi weed eater is a simple task that can be done in a few minutes. In this guide, we'll walk you through the process step by step.

Before we start, ensure you have the following items at hand: a new spool of Ryobi weed eater line (ensure it's compatible with your model), a pair of gloves to protect your hands, and a flat surface to work on.

Preparation

Before you start, it's essential to prepare your Ryobi weed eater and the new line.

AD
How to Remove and Replace Ryobi Bump Knob, Ryobi Trimmer String Replacement.
How to Remove and Replace Ryobi Bump Knob, Ryobi Trimmer String Replacement.
How to Replace Ryobi Electric Trimmer String Line
How to Replace Ryobi Electric Trimmer String Line
How to change the trimmer line on a 40 volt Ryobi edger / weed eater / weed wacker
How to change the trimmer line on a 40 volt Ryobi edger / weed eater / weed wacker

Firstly, disconnect the spark plug and remove the spool cover on the left side of your weed eater. This will give you access to the line.

Choose the Right Line

Not all lines are created equal, and using the wrong one can damage your weed eater. Ensure you're using a line that's compatible with your Ryobi model and designed for your type of weeds.

an image of a person holding a green object in their hand with the words robi string repair on it
an image of a person holding a green object in their hand with the words robi string repair on it
How to change the trimmer line on a Ryobi 18 volt cordless string trimmer
How to change the trimmer line on a Ryobi 18 volt cordless string trimmer

Ryobi offers a variety of lines, including bovine lines for tough weeds, and nylon lines for lighter jobs. Always check your user manual to ensure you're using the correct type.

Unspooling the Old Line

Now that you've prepared your weed eater, the next step is to remove the old line.

AD

Hold the line spool in one hand and use your other hand to pull the line out of the head. You should feel some resistance, but if it's too hard, you might need to pull harder. If the line breaks, don't worry. You can just start over.

Cutting the Old Line

Once you've pulled out enough line, use a pair of scissors to cut it. You'll need about 10 to 12 inches of new line, so cut the old line to that length.

Next, remove the old line from the weed eater head. If it's stuck, you can use a flathead screwdriver to gently pry it out. Be careful not to bend the line guide or the line release button.

AD

Installing the New Line

Now that the old line is out, it's time to install the new one.

First, insert the new line into the line release button on the head. If your line has an arrow or a direction, ensure it's facing towards the direction of your weed eater's rotation.

Winding the Line

Next, wind the line around the spool. Ensure it's going in the right direction and isn't crossing over itself. If it does, you'll need to unwind it and start again. Wrap the line around the spool in a perpendicular direction, not at an angle.

AD

Wind the line around the spool until you have about 10 to 12 inches of line remaining. Then, insert the other end of the line into the hole on the spool's side and pull it through to secure it.

Securing the Line

Now, grab the end of the line and pull it all the way through the hole. You should feel some resistance as the line catches on the spool's holding teeth.

Once the line is secure, cut it to the correct length. For most Ryobi weed eaters, the line should be cut to about 8 to 10 inches. Always check your user manual for the exact measurement for your model.

Final Assembly

With the new line installed, it's time to assemble your Ryobi weed eater and get back to work.

First, insert the spool back into the weed eater. Make sure the line is feeding through the line guide correctly. Then, replace the spool cover and reattach the spark plug.

Next time your Ryobi weed eater starts to struggle, you'll know exactly how to change the line to get it back in action. Happy weeding!

AD