How to Change Oil on Toro Recycler 22
If you own a Toro Recycler 22, you likely appreciate the convenience of having a mower equipped with a gas and electric start. But like any piece of machinery, regular maintenance is key to keeping it running smoothly. One of the most crucial upkeep tasks is changing the oil. Don't worry, we've got you covered with this comprehensive guide on how to change oil on a Toro Recycler 22.
Before we embark on this process, gather the necessary tools and materials. You'll need a wrench (size 13), an oil filter wrench, an oil drainage pan, a funnel, 1 quart of Toro's recommended SAE 5W-30 engine oil, and a new oil filter.
Preparation
Before you begin, make sure the Toro Recycler 22 is on a flat surface. Engage the parking brake for safety, and allow the engine to run for about 15 minutes to warm up the oil, making it easier to drain.
Next, turn off the engine and let it cool for at least 30 minutes to prevent any burns or accidents.
Draining the Oil
Locate the oil pan underneath the mower. Place the oil drainage pan directly beneath it, and using your wrench, loosen the pan's drain plug by turning it counterclockwise. Remove the plug by hand once it's loose enough.
Allow the oil to drain completely into the pan. This may take a few minutes, so be patient. Once the oil has stopped draining, wipe the area clean with a rag to remove any residue or debris. Replace and tighten the drain plug by hand, then secure it with the wrench.
Replacing the Oil Filter
The oil filter cartridge on the Toro Recycler 22 is disposable. Begin by removing the old filter using the oil filter wrench. Turn the filter counterclockwise until it's loose enough to remove by hand.
Once removed, discard the old filter. Inspect the filter gasket and ensure it's not damaged. If it is, replace it before installing the new filter. Lubricate the gasket of the new filter with a bit of new oil. Position the filter onto the engine and tighten it by hand, turning it clockwise. Do not use the wrench to tighten it too much, as this can strip the threads or deform the gasket.
Adding New Oil
Now that the oil pan and filter are clean and ready, it's time to introduce the new oil. Unscrew the oil fill cap on top of the engine and insert the funnel into the opening.
Slowly pour 1 quart of the recommended SAE 5W-30 engine oil into the opening. Once the oil is poured, remove the funnel and replace the oil fill cap. Check the oil level using the dipstick and add more oil if necessary, but typically, only one quart is needed for this mower.
Final Checks
After you've added the oil, double-check that the drain plug and oil filter are both properly secured and that there are no leaks.
The last step is to run the Toro Recycler 22 for about 15 minutes to ensure the new oil is properly circulated. Turn off the engine and allow it to cool before rechecking the oil level. Top up if necessary.
Congratulations, you've successfully changed the oil on your Toro Recycler 22! Regular oil changes are vital to keep your mower running smoothly, so remember to perform this routine maintenance every 50 hours of operation or once a year, whichever comes first. Happy mowing!