how to change oil in pressure washer

How to Change Oil in Pressure Washer: Step-by-Step Guide

By Laura Harris
AD

Does your pressure washer seem to be losing power or efficiency? It might be time to change the oil. Like any machinery, regular maintenance is key to keeping your pressure washer running smoothly. Here's a step-by-step guide on how to do it right.

Before we start, let's clarify that changing oil is not just for gas-powered pressure washers; electric models also require this maintenance task. For gas-powered models, it's recommended to change the oil every 50 hours of use or annually. For electric ones, check your owner's manual for specific recommendations, but it's typically every year or two.

Gathering Your Tools and Materials

First, ensure you have all the necessary tools and materials to change the oil in your pressure washer. You'll need:

AD
Avoid These Costly Mistakes! How and When to Change Pressure Washer Oil
Avoid These Costly Mistakes! How and When to Change Pressure Washer Oil
How to Change Pressure Washer Pump Oil (Step by Step Guide)
How to Change Pressure Washer Pump Oil (Step by Step Guide)
How to Change Pump Oil on Pressure Washer: A Step-by-Step Guide
How to Change Pump Oil on Pressure Washer: A Step-by-Step Guide
  • New oil (check your owner's manual for the type and amount needed)
  • An oil filter (if applicable, check your owner's manual)
  • A socket wrench
  • Gloves and eye protection
  • A catch pan or tray to collect the old oil

Preparation: Run the Engine and Locate the Oil Drain Plug

Before you start, run the engine for about 10-15 minutes to warm up the oil. This will make the old oil drain out more completely. Next, shut off the engine and allow it to cool down for at least 30 minutes to prevent any burns.

Locate the oil drain plug, usually situated at the bottom of the engine. It's often marked with an oil can or 'OIL' symbol. This plug can be accessed from the underside of the frame or through a removable panel.

How To Check and Change Pressure Washer Pump Oil
How To Check and Change Pressure Washer Pump Oil
How to Change Oil on Generac Pressure Washer - Easy DIY Guide
How to Change Oil on Generac Pressure Washer - Easy DIY Guide

Drain the Old Oil and Remove the Oil Filter

Position your catch pan or tray underneath the oil drain plug. Using your socket wrench, loosen and remove the plug. Allow the old oil to drain completely. Be patient, as this can take a few minutes. If your pressure washer has an oil filter, now is the time to replace it. Most follow the same process as an oil change in a car. Loosen and remove the old filter, oftentimes by hand or with a wrench, and discard it.

While the oil is draining, consider changing the oil filter element if your model uses one. Many pressure washers use a lifetime filter that doesn't need changing, but some have a replaceable filter element. Check your owner's manual to be sure.

AD

Refilling with New Oil

Once all the old oil has drained, clean the area around the oil drain plug and oil filter (if applicable) to remove any residue. Then, reinstall the oil drain plug by hand, making sure it's tightened properly, but not overly tight. You may need to consult your owner's manual for the exact torque specifications. Now it's time to refill with new oil.

Locate the oil fill hole, usually on top of the engine. Remove the oil fill cap and use a funnel to pour in the correct amount of new oil, as specified in your owner's manual. Once you've added the correct amount, replace the oil fill cap securely.

Reset the Oil Level Indicator and Check for Leaks

Some pressure washers have an oil level indicator (often a dipstick) that needs resetting after an oil change. Check your owner's manual to see if this applies to your model. If so, pull out the dipstick, wipe it clean, and reinsert it all the way. Then, pull it out again and check the oil level. Top off with more oil if necessary, ensuring you stay within the "FULL" range.

AD

With the new oil in, start the engine and let it run for a minute to allow the oil to circulate. Then, look underneath the engine for any signs of leaks around the oil drain plug or oil filter. If there are no leaks, you've successfully changed the oil in your pressure washer.

Remember, regular oil changes are key to maintaining your pressure washer's performance and lifespan. Keep a log of your maintenance tasks, including oil changes, to ensure you're staying on top of your equipment's care. Happy washing!

AD