how to change nissan altima key battery

Replace Nissan Altima Key Battery: Step-By-Step Guide

By Kevin Robinson
AD

Do you find yourself regularly squinting to see your Nissan Altima's key fob buttons? It might be time to change your key battery, as a weak battery can lead to reduced functionality. Don't worry, this is a simple process you can handle yourself. Here's a step-by-step guide on how to change your Nissan Altima's key battery.

Gathering Required Tools and Items

Before you start, ensure you have the necessary tools and items:

  • A CR2025 battery (the size used in most car key fobs)
  • A small flathead screwdriver or a coin (to pry open the key fob)
  • A pair of tweezers (to handle the small battery)

Understanding Your Key Fob

Your Nissan Altima's key fob has two parts: the fob itself and the key blade. The battery is housed in the fob. Luckily, the process is the same regardless of your Altima's model year.

It's also helpful to know that the key blade and the fob are separate for safety reasons. The key blade has a small hole that houses a tiny metal rod. When inserted into the ignition or door, this rod completes a circuit that allows the vehicle to start or the doors to unlock, even if the battery in the fob is dead.

Locating the Battery Compartment

On the back of your key fob, there's a small hole or a seam. This is where you'll insert the flathead or coin to pry open the fob.

The battery compartment is located underneath the cover. It's a small cavity with a positive (+) and negative (-) symbol etched into the plastic. The current battery is held in place by a small Phillips-head screw.

The Replacement Process

Now that you've identified the components, let's walk through the replacement process:

Removing the Old Battery

Using the screwdriver or coin, carefully pry open the key fob. The cover should detach with a little effort. Be careful not to break it, as these covers aren't replaceable.

Using your tweezers, gently lift the old battery out of the compartment. It should pop out relatively easily. If it doesn't, don't force it, as this could damage the contacts.

Inserting the New Battery

Take your new CR2025 battery and align it with the positive (+) and negative (-) symbols in the battery compartment. The battery should fit snugly with the flat side facing up. The positive side should be facing up as well, with the engraved + symbol matching the one on the compartment.

Once the battery is in place, use the Phillips-head screwdriver to secure it. Tighten it gently to fasten the battery in place. If it's too tight, it could crush the battery. If it's too loose, the battery could shake around and lose contact.

Testing the New Battery

Reassemble your key fob and test the new battery by pressing the various buttons. The lights should illuminate, and the locks on your car should react accordingly.

Remember, it can take a few minutes for the key fob to pair with your car again. If it doesn't work immediately, give it a few moments and try again.

Troubleshooting Common Issues

If your key fob still isn't working, here are a few troubleshooting tips:

Check the Battery's Placement

Ensure the battery is properly aligned with the + and - symbols. If it's inserted backwards, it won't work.

Also, check if the battery is properly seated. If it's not pressed firmly against the contacts, it won't work.

Try a Different Battery

Batteries can come with a small amount of charge even when they're new. If your new battery isn't working, try using a different one to rule out any defects.

Reset Your Key Fob

Sometimes, all you need to do is reset your key fob. This can be done by:

  • Removing the battery for 30 seconds, then reinserting it.
  • Entering your vehicle and closing all doors.
  • Putting your key in the ignition and turning it to the "ON" position.
  • Pressing the "LOCK" button on your key fob and turning the key back to the "OFF" position.
  • Repetitive the process again by turning the key to the "ON" position and pressing the "LOCK" button on your key fob until the locks cycle through all positions.
  • Finally, remove the key from the ignition and test your key fob.

If all else fails, it may be time to visit your local Nissan dealer or a professional locksmith.

While changing your Nissan Altima's key battery might seem daunting at first, it's a straightforward process that anyone can do. Just remember to work carefully and patiently, and you'll be back on the road with a fully functional key fob in no time. Happy driving!

How To Change 2019 - 2023 Nissan Altima Remote Key Fob Battery - Remove Replace Replacement Tutorial
How To Change 2019 - 2023 Nissan Altima Remote Key Fob Battery - Remove Replace Replacement Tutorial
How to Change/replace key fob battery in 2020 Nissan Altima
How to Change/replace key fob battery in 2020 Nissan Altima
NISSAN ALTIMA KEY FOB BATTERY REPLACEMENT 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
NISSAN ALTIMA KEY FOB BATTERY REPLACEMENT 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
Nissan Altima How To Change Smart Key Fob Battery 2007 2008 2009 2010 2011 & 2012 With Part Number
Nissan Altima How To Change Smart Key Fob Battery 2007 2008 2009 2010 2011 & 2012 With Part Number
How to Change / Replace a Key Fob Battery in Nissan Altima 2015
How to Change / Replace a Key Fob Battery in Nissan Altima 2015
AD