how to change maytag water filter

Mastering Maytag: Effortless Steps to Change Your Water Filter

By Olivia Allen
AD

Changing a water filter in your Maytag refrigerator is a straightforward task that can help maintain the freshness and purity of your drinking water. With a little know-how and the right steps, you can ensure a smooth process without any leaks or damage. Let's dive into a comprehensive guide on how to change your Maytag water filter.

Before we begin, make sure you have the following items at hand: your new Maytag water filter (model W10298190A is a common one), a Phillips head screwdriver, and a towel to catch any spills. Also, ensure your refrigerator is turned off and the water line is disconnected at the start to avoid any water overflow.

Locating Your Maytag Water Filter

The Maytag water filter cartridge, also known as the 'Guardian' filter, is usually located within the fresh food compartment, near the bottom right corner. In some models, it might be situated behind the grill at the bottom of the refrigerator.

AD
How to Replace Your Refrigerator Water Filter | Maytag
How to Replace Your Refrigerator Water Filter | Maytag
How To Reset Change Filter Light - Jenn-Air (Maytag) Refrigerator Water & Ice Filter
How To Reset Change Filter Light - Jenn-Air (Maytag) Refrigerator Water & Ice Filter
How to Replace Your Refrigerator Water Filter | Maytag
How to Replace Your Refrigerator Water Filter | Maytag

To access the filter, you may need to pull out the crisper drawer or remove the grill, depending on its location. Always ensure your hands are clean and dry to maintain hygiene and avoid any accidental slippage.

Preparing Your Refrigerator for Filter Change

Before replacing the filter, it's crucial to turn off your refrigerator and disconnect the water line to prevent any water leaks or damage. How to do this:

Why Does Samsung Water Filter Not Push In?
Why Does Samsung Water Filter Not Push In?
How to clean a Maytag dishwasher filter 2022 (Guide)
How to clean a Maytag dishwasher filter 2022 (Guide)
  1. Turn off the power to your refrigerator at the circuit breaker or unplug it if it's a plug-in model.
  2. Find the incoming water line, usually at the back of the unit, and turn the shut-off valve clockwise to stop the water supply.

Removing the Old Maytag Water Filter

Now that your refrigerator is ready, let's remove the old filter:

  • Twist the old filter counterclockwise to remove it. It should come out easily once you've started it turning. If it's stuck, try using a Phillips head screwdriver to gently pry it loose.
  • Discard the old filter. Remember that it's been filtering out contaminants and may harbor bacteria, so handle it with care and dispose of it properly.

Installing the New Maytag Water Filter

With the old filter removed, it's time to install the new one. Make sure you have the correct filter model for your Maytag refrigerator model.

AD

Before installation, soak the new filter in warm water for about 10-15 seconds to help it release air and expand quickly once it's in place. This step also helps to prevent any air pockets that could decrease filtration capacity.

Inserting the New Maytag Water Filter

Here's how to install the new filter:

  1. Align the new filter with the inlet port and turn it clockwise until it's tight. The position is secured when you can't turn it anymore. Do not overtighten.
  2. Turn the water supply back on by turning the shut-off valve counterclockwise.

Priming the New Filter and Restoring Water Flow

Before drinking water from the dispenser, you need to prime the new filter to remove any air that may have been trapped during installation:

AD
  • Fill a large container with water and dispense it through the water door until the filter has flushed out any trapped air. You may notice some bubbles or water with a slight smell at first, but this is normal.
  • Empty and refill the container, then repeat this process until there are no more signs of bubbles or odors. This could take up to 1-2 gallons of water.
  • Now, turn the power back on to your refrigerator and let it cool down for about 2-4 hours before using the water dispenser.

Congratulations! You've successfully changed your Maytag water filter. Remember to replace the filter every six months or so, depending on your water usage and quality. Regular filter changes ensure clean, fresh, and safe drinking water for you and your family. Happy Filter Changing!

AD