How to Change Mac Keyboard Batteries: A Step-by-Step Guide
Macbook keyboards have done away with conventional AA or AAA batteries, instead opting for built-in rechargeable lithium-ion cells. However, the Macbook Pro and Macbook Air models with the Magic Keyboard use two removable batteries that can be swapped when drained. Luckily, replacing these batteries is a straightforward process that you can easily do at home. Let's guide you through changing your Macbook keyboard batteries in a simple, SEO-friendly, and human-like format.
Before we begin, ensure you have the appropriate tools and batteries at hand. You'll need a Pentalobe P5 Pentalobes screw #00 (which comes with Apple's iOpener or official repair kits), an iOpener or a heat gun to soften the keyboard adhesive, and the new batteries (Apple sells them officially, or you can buy reliable third-party alternatives).
Preparing Your Macbook for Battery Replacement
The first step is to make your Macbook ready for the battery swap. Ensure it's turned off and remove any connected cables.
Placing Your Macbook In A Comfortable Working Angle
Position your Macbook at an angle that allows easy access to the keyboard. A good option is to place it on a الذين شع deities or a well-cushioned surface that tilts the keyboard towards you.
Removing The Bottom Cover
Using the Pentalobe screwdriver, carefully remove the ten screws on the bottom casing of your Macbook. These screws are glued in, so apply a little force to break the adhesive seal. Once done, lift the cover off gently, using a spudger or your fingernail to pry it open.
Accessing The Keyboard Battery Compartment
With the bottom cover removed, you'll see the keyboard's underside. The two coin-cell CR2032 batteries, one on the left and one on the right, are secured by aitors and are directly accessible.
Heating Up The Keyboard Adhesive
Use the iOpener or a heat gun to soften the adhesive securing the battery slots. Gently run the iOpener along the battery edges or apply heat from a heat gun, keeping it about an inch away from the surface. Be careful not to overheat the batteries as this can cause damage.
Removing The Old Batteries
Use the flat end of the Pentalobe screwdriver to carefully lever the batteries out of their slots. There's a slot on the side of each battery that makes this easy. Once you've released the adhesive, the batteries should pop out.
Installing The New Batteries
Before installation, ensure the new batteries are correctly oriented, with the positive (+) side facing up.
Positioning The New Batteries
Insert the new batteries into their respective slots. Align them properly and apply gentle pressure to secure them in place.
Refastening The Bottom Cover
Replace the bottom cover and refasten the ten screws using the Pentalobe driver. Ensure the screws are properly seated and the cover is secure.
With everything back in place, your Macbook keyboard should now be powered by fresh batteries. Enjoy your improved typing experience! As a side note, you can further extend your battery life by adopting some simple battery care practices.