How to Change Kwikset SmartCode: A Comprehensive Guide
Are you a proud owner of a Kwikset SmartCode lock, but you're ready for a change? Perhaps you've moved into a new home, or maybe you've just decided it's time for an upgrade. Either way, knowing how to change your Kwikset SmartCode lock is a valuable skill to have. Let's dive into a step-by-step guide to help you through the process.
Before you begin, make sure you have the following tools at hand: a flathead screwdriver, a Phillips head screwdriver, and a new Kwikset SmartCode lock. It's also a good idea to have a pencil and paper to take notes on your current lock's code, as you'll need to program your new lock with the same code.
Preparation and Unlocking
Begin by unlocking your current Kwikset SmartCode lock using the current code. This will allow you to access the lock mechanism and prepare the area for the new lock.
Next, use your flathead screwdriver to remove the screw from the faceplate of the lock. Be careful not to lose this screw, as you'll need it later. After removing the screw, gently pull off the faceplate to expose the lock mechanism.
Removing the Lock
With the faceplate off, use your Phillips head screwdriver to remove the two screws securing the latch on the interior side of the door. Once the screws are out, lift the latch off the door to expose the mounting screws on the exterior side.
Use your flathead or Phillips head screwdriver (depending on the screws used by your lock) to remove the mounting screws on the exterior side of the door. Now, you should be able to pull the lock out of the door hole, releasing it from the strike plate on the door frame.
Prepared the Door and New Lock
With the old lock removed, use your screwdriver to adjust the depth of the hole in your door if necessary, to accommodate the new lock's latch. Also, make sure the strike plate on the door frame is properly aligned with the door hole.
Before installing the new lock, ensure it's programmed with the same code as your old lock. To do this, follow the programming instructions in the new lock's manual. Once programmed, place the new Kwikset SmartCode lock into the door hole, ensuring the latch aligns with the hole in the door.
Installing the New Lock
With the new lock in place, use your screwdriver to secure it to the door by inserting the mounting screws through the holes in the lock and into the door. Make sure the screws are tight and the lock is secure.
Next, insert the latch through the hole in the door and attach the strike plate to the door frame. Secure the strike plate with the screws provided with the new lock.
Attaching the Faceplate and Final Touches
Now that the lock is securely mounted, place the faceplate over the lock mechanism and secure it with the screw you removed earlier. Make sure the faceplate is level and looks seamless with the rest of your door.
Test your new Kwikset SmartCode lock by entering your code and checking that the lock unlatches and locks the door securely. Remember to test both the manual key override and the automatic lock feature. If everything works as expected, you're all set!
Congratulations, you've successfully changed your Kwikset SmartCode lock! By following these steps, you should be able to upgrade your lock with confidence. Now that your lock is changed, make sure to test it regularly to ensure it's working perfectly. Enjoy your new lock!