how to change kwikset door handle

Mastering the Switch: How to Change a Kwikset Door Handle

By Thomas Walker
AD

Tired of that old, worn-out door handle? Looking to enhance your home's security and aesthetics? Upgrading to a Kwikset door handle could be the perfect solution. This comprehensive guide will walk you through a step-by-step process on how to change a Kwikset door handle, ensuring a smooth and successful DIY project.

Before we dive into the detailed steps, let's discuss why you should consider Kwikset. Known for their durability and innovative SmartKey security technology, Kwikset handles offer both style and robust protection. They come in various finishes and designs to suit different decorative schemes, making them an excellent choice for homeowners and renters alike.

Preparation: Tools and Parts

Before you begin, gather the necessary tools and parts to ensure a smooth process. You'll need the following:

AD
How To Replace a Door Knob for Handle Set
How To Replace a Door Knob for Handle Set
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to replace door knobs with Kwikset Levers
How to replace door knobs with Kwikset Levers
  • New Kwikset door handle set (including latch, handle, and screws)
  • Phillips head screwdriver
  • Tape measure
  • Pencil
  • Utility knife (if removing an old handle)
  • Painter's tape (optional, for preventing damage)

With your tools and parts ready, let's move on to the installation process.

Removing the Old Door Handle

First, you need to remove the old door handle. Here are the steps:

HOW TO INSTALL A BATHROOM DOOR HANDLE (KWIKSET)
HOW TO INSTALL A BATHROOM DOOR HANDLE (KWIKSET)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
  1. Close the door and engage the latch to ensure it's fully seated in the strike plate.
  2. Using a Phillips head screwdriver, remove the two screws at the back of the door handle. They might be quite long, so be cautious not to lose them.
  3. With the screws removed, the handle should now be loose. If it's still stuck, gently tap the doorstop end of the handle with a hammer or mallet to release it.
  4. Remove the old handle and set it aside for disposal or recycling.

If your old handle has any residual adhesive or paint, use a utility knife to carefully scrape it off, taking care not to damage the door's surface.

Marking and Preparing the Door

Next, you'll prepare the door for your new Kwikset handle. Follow these steps:

AD
  1. Use a tape measure to locate the center of the door where the new handle will be installed. Mark this point with a pencil.
  2. Hold the backplate of the new handle against the door, with the latch side against the edge. Center the backplate on your marked point and trace around it with a pencil. This will give you a template for drilling the holes.
  3. Use painter's tape to protect the door's surface from any scratches or damage while drilling.

Now that you've marked and prepared the door, you're ready to install the new Kwikset door handle.

Installing the New Kwikset Door Handle

With the old handle removed and the door prepared, it's time to install your new Kwikset door handle. Follow these steps:

Drilling the Holes

Before you start drilling, double-check that the latch and handle are aligned with your marked points. If everything looks good, proceed with the following steps:

AD
  1. Using a drill bit that matches the size of the locking mechanism, carefully drill through the door at the points you've marked. Be sure to drill only as deep as the backplate's depth to avoid damaging the door's edge.
  2. Drill a slightly larger hole for the latch, as per the manufacturer's instructions. This hole should be deep enough to accommodate the latch mechanism but not so deep that it compromises the door's strength.

Once you've drilled the holes, clean off any debris and ensure the door is free of any sharp edges.

Installing the Latch Mechanism

Now that you've prepared the door, it's time to install the latch mechanism. Here's how:

  1. Insert the latch mechanism through the hole you drilled for it. The latch should fit snugly and should not wobble. If it does, you may need to enlarge the hole slightly or adjust your drilling depth.
  2. While holding the latch in place, insert the backplate through the hole on the other side of the door. The sides of the backplate should align with the holes you've drilled.
  3. Using the screws provided, secure the backplate from the other side of the door. Tighten the screws by hand until they're snug, then use a screwdriver to fully secure them. Be careful not to overtighten and strip the screw holes.

With the latch mechanism secured, you're ready to install the handle.

AD

Installing the Door Handle

Installing the handle is the final step in your Kwikset door handle installation. Follow these steps:

  1. Insert the tongue of the handle through the hole on the knob side of the door.
  2. Align the handle with the backplate and engage the interlocking mechanism. The handle should now be securely in place but still able to turn.
  3. Insert the turn button and the provided washer onto the shaft of the handle, followed by the adjustable ring.
  4. Push the handle towards the door to engage the ring with the splines on the shaft. Tug gently on the handle to ensure it's securely attached. You may need to adjust the position of the ring to get the right fit.
  5. With the handle securely in place, engage the SmartKey lock cylinder (if your handle set includes one) by aligning the keyhole with the tube on the handle's shaft and gently pushing it in.
  6. Lock and unlock the door a few times to ensure the handle and lock mechanism are working correctly.

Congratulations! You've successfully changed your door handle to a Kwikset model. Your home is now not only more secure but also benefits from an attractive new look.

Remember, maintaining your Kwikset door handle is essential for its longevity and optimal performance. Regularly lubricate the lock mechanism, keep the handle clean, and ensure the door frame and strike plate are correctly aligned. With proper care, your new Kwikset door handle will serve you well for many years to come.

So, what are you waiting for? Upgrade your home's style and security with a Kwikset door handle today. Happy DIYing!

AD