How to Change iPhone 6s Battery: Step-by-Step Guide
Is your iPhone 6s running out of power faster than usual? It might be time to replace its battery. While it's a straightforward process, changing an iPhone 6s battery requires careful attention. Here's a step-by-step guide to help you through the process.
Before we dive in, ensure you have the necessary tools and parts: a replacement battery, a pentalobe p2 screwdriver, a Phillips #000 screwdriver, a standard Spudger tool, a suction cup, and a little bit of patience. Also, always backup your data to iCloud or your computer to avoid any loss during the process.
Preparation and Disassembly
The first step involves preparing your iPhone and gathering your tools. Once ready, you can begin to disassemble your iPhone in the following steps:
1. **Power Off Your iPhone**: Hold down the power button and slide to shut it down. Connect your iPhone to your computer and launch iTunes. When prompted, select "Trust This Computer", then chose "Back Up Now" to ensure your data is secure.
Disconnect the Pentalobe Screws
The iPhone 6s has five pentalobe screws along its bottom edge. Using your pentalobe p2 screwdriver, carefully unscrew these to remove the back panel.
2. **Remove the Bottom Cover**: Insert the edge of a plastic opening tool into the gap at the bottom of your iPhone and twist slightly. Use the tool to pry the bottom cover off.
Remove the Battery Connector
The battery connector is a thin cable that runs from the battery to the lower left corner of the iPhone. Use a plastic opening tool to gently pry it up from the logic board.
3. **Disconnect the Battery Connector**: Use tweezers to carefully lift the connector and disconnect it from the motherboard.
Battery Replacement
Now that you've accessed the battery, you can replace it with a new one. Follow these careful steps:
4. **Remove the Battery**: Use a plastic opening tool to carefully pry the battery out of its housing. There are two clips on either side of the battery. Gently lift one edge upwards while using the tool to pry up on the other edge. Do this for both sides until the battery pops out.
Install the New Battery
Compare the new battery with the old one to ensure they're identical. If they are, position the new battery into the phone's frame, ensuring the battery's wireless charging coil faces down.
5. **Reconnect the Battery Connector**: Carefully align the connector's gold contacts with the corresponding gold contacts on the logic board. Press down firmly and evenly to ensure a solid connection.
Reassemble Your iPhone
Now that the battery is replaced, it's time to put everything back together:
6. **Replace the Bottom Cover**: Align the bottom cover with the phone's frame and press down firmly until it snaps back into place.
7. **Replace the Pentalobe Screws**: Using your pentalobe p2 screwdriver, replace the five screws along the bottom edge of your iPhone.
8. **Power On Your iPhone**: Press and hold the power button until the Apple logo appears. Once powered on, your iPhone should now have a fresh battery that lasts longer.
Test Your iPhone
To ensure your iPhone is functioning correctly with the new battery, go to Settings > Battery > Battery Health. This will give you an idea of your battery's capacity and performance. You can also check if your iPhone heats up normally during operation.
Congratulations, you've just successfully replaced your iPhone 6s battery! Always remember to handle your phone gently and charge your battery regularly to maintain its health. If you're unsure about any part of the process, consider seeking professional help.