how to change headlight on 2010 chevy malibu

2010 Chevy Malibu Headlight Change: Simple Steps

By Daniel Garcia
AD

Is your 2010 Chevrolet Malibu having trouble seeing the road at night? It might be time to replace your headlights. Don't let a burnt-out headlight compromise your safety. Here's a step-by-step guide on how to change headlight on a 2010 Chevy Malibu.

The process is straightforward and can be completed in about 30 minutes. Let's get started!

Gathering Tools and Preparing

Before you begin, make sure you have the necessary tools and a new headlight assembly. Here's what you'll need:

AD
08-12 Chevy Malibu How To Replace the Headlight
08-12 Chevy Malibu How To Replace the Headlight
Chevrolet Malibu How To Change Headlight Bulbs 2008 2009 2010 2011 & 2012 With Part Numbers
Chevrolet Malibu How To Change Headlight Bulbs 2008 2009 2010 2011 & 2012 With Part Numbers
How to Change/Replace Headlight Bulbs on 2008-2012 Chevy Malibu
How to Change/Replace Headlight Bulbs on 2008-2012 Chevy Malibu

  • A new headlight assembly
  • A socket set
  • A flathead screwdriver
  • Face protection (safety glasses)
  • A ladder (optional, for better access)

Reset Oil Maintenance Light - 2010 to 2013 Chevy Malibu
Reset Oil Maintenance Light - 2010 to 2013 Chevy Malibu
2016 To 2024 Chevrolet Malibu How To Change Headlight Bulbs With Part Numbers Quick & Easy
2016 To 2024 Chevrolet Malibu How To Change Headlight Bulbs With Part Numbers Quick & Easy

Finding the Right Headlight

Ensure you're purchasing the correct headlight for your vehicle. For a 2010 Chevy Malibu, you'll need a H11 headlight bulb. Verify the part number before making a purchase.

The part number for the Chevy Malibu headlight assembly is 39487074. Always double-check with your local dealership or an online parts catalog to ensure the best fit.

AD

Preparing Your Workspace

Find a well-lit, safe, and comfortable work area, preferably in your driveway or garage. If you're working under the hood, consider using a ladder for better access. Always wear safety glasses to protect your eyes from debris.

Removing the Old Headlight

Now that you have everything ready, let's dive into replacing the headlight. Remember, these steps involve the driver's side headlight; the passenger side is similar but mirrors the process.

Disconnect the Battery

Before starting, disconnect the negative (-) battery terminal to prevent any electrical shorts. Use a wrench to loosen and remove the negative cable.

AD

This step is crucial for your safety. The vehicle's electrical system can cause injury if not handled properly.

Accessing the Headlight Assembly

Open the hood and locate the headlight assembly. Use a flathead screwdriver to pry off the side covers of the fender liner. Be careful not to break the tabs holding them in place.

Once the covers are removed, you'll have better access to the back of the headlight and the electrical connector. Before proceeding, make note of how the electrical connector is positioned to aid in reattaching it later.

AD

Removing the Old Headlight Bulb

With the headlight assembly exposed, you're ready to remove the old headlight bulb. Follow these steps carefully:

Locate the Retaining Screw

Find the Philips head retaining screw at the back of the headlight bulb. This screw secures the bulb in place and should be visible through the opening you've created by removing the fender liner covers.

Remove the Bulb

Using a socket wrench, remove the retaining screw by turning it counterclockwise. Once the screw is loose, carefully pull the headlight bulb out of the headlight housing. Do not touch the glass bulb with your bare hands, as the oil from your fingers can cause the bulb to overheat and fail.

Installing the New Headlight Bulb

Now that you've successfully removed the old headlight bulb, it's time to install the new one. The process is the reverse of the removal:

Install the New Bulb

With the new bulb awaiting installation, gently guide it into the headlight housing, making sure to align the tabs at the top and bottom of the bulb.

Once the bulb is fully inserted, use the retaining screw to secure it in place. Tighten the screw by turning it clockwise until it's snug. Be careful not to overtighten and strip the threads.

Reattach the Electrical Connector

Reattach the electrical connector to the bulb, ensuring it's properly connected and aligned as it was when you began the process. Gently push the connector until you hear a click, indicating a proper connection.

Reassembling and Test

After successfully installing the new headlight bulb, it's time to reassemble and test the new headlight:

Reattach the Fender Liner Covers

Carefully reattach the fender liner covers, ensuring they snap back into place properly. Be gentle to avoid breaking the tabs.

Reconnect the Battery

Reconnect the negative (-) battery terminal, securing it with the wrench. Ensure the cable is properly connected and tightened.

Test the New Headlight

Test the new headlight by turning the ignition to the "ON" position but do not start the engine. Turn on the headlights and check that the new bulb is working correctly. Replace the other headlight if necessary.

(p)Remember, it's essential to replace both headlights at the same time to maintain even lighting and avoid overworking one headlight. Enjoy your better-lit drives! If you have any concerns or need professional assistance, don't hesitate to consult a professional mechanic or your local Chevy dealership. Happy driving!
AD