how to change handlebars on motorcycle

Step-by-Step: Change Motorcycle Handlebar in a Snap

By Melissa Garcia
AD

Changing handlebars on your motorcycle can greatly improve your riding experience, alter the bike's aesthetics, and even Positively impact performance. This comprehensive guide will walk you through the process, ensuring smooth transformation.

Before you begin, ensure you have the necessary tools - a socket wrench, an Allen wrench or hex key, a breaker bar, and new handlebars that fit your bike's make and model. Always follow manufacturer guidelines for safety and precision.

Preparation and Removal of Old Handlebar

Start by removing the grip from the old handlebars. Typically, you can slide these off, but sometimes they need assistance from a razor blade or flathead screwdriver.

AD
How to Change Motorcycle Handlebars
How to Change Motorcycle Handlebars
the front end of a motorcycle with words workshop series changing your handlebars on it
the front end of a motorcycle with words workshop series changing your handlebars on it
How To Fix Sticky Handlebar Grips On Motorcycles
How To Fix Sticky Handlebar Grips On Motorcycles

Use your socket wrench to loosen the bolts securing the handlebars to the clamp. You'll likely need a breaker bar to fully remove them due to their tightness. Unbolt the handlebars from the clutch and brake reservoirs, then slide them off the fork tubes.

Locating Bike-Specific INFO

Consult your bike's manual or search online for specific details about removing the old handlebars. Some motorcycles have additional bolts or steps unique to their design that need to be followed.

Is Changing Your Motorcycle Handlebars Worth It?
Is Changing Your Motorcycle Handlebars Worth It?
Here's How To Swap Out Those Ratty Old Motorcycle Handlebars For New Ones
Here's How To Swap Out Those Ratty Old Motorcycle Handlebars For New Ones

Once you've removed the old handlebars, clean the area around the fork tubes to prevent debris from entering the steering mechanism. This step is crucial to maintain your bike's longevity.

Preparing New Handlebar

Check the fit of your new handlebars. They should slot neatly into the fork tubes. If not, you may need to adjust them or the fork tube orientation for a secure fit.

AD

Lubricate the fork tubes with some grease. This will help the handlebars glide smoothly onto the tubes and protect the metal from corrosion.

Installing New Handlebar

Slide the new handlebars onto the fork tubes. Ensure the clutch and brake cables can still function smoothly and aren't stretched taut. Also, make sure the throttle doesn't bind or stick after installation.

Secure the new handlebars to the clamp and reservoirs with new bolts. Tighten the bolts in a crisscross pattern, as you would when tightening a wheel. Follow manufacturer's guidelines for the recommended torque specification.

AD

Reinstalling Controls and Cables

Reattach the clutch and brake reservoirs, ensuring they're secure and leveled. Reinstall any fairings or other components you removed during the process.

Reinstall the grips onto the new handlebars. If they don't slide on easily, apply a thin layer of soap or dish detergent to the inside as a lubricant.

Test and Adjust

Start your motorcycle and test the clutch and brake lever for proper function. Adjust the cable tension if necessary, following your bike's manual instructions.

AD

Take a short test ride to ensure everything works as expected. Perform final adjustment as needed, enjoying the new dynamic and feel.

There you have it - changing handlebars on your motorcycle is a straightforward process that rewards you with enhanced comfort, looks, and potentially improved performance. Happy riding, and savor the new sensation every time you hit the road."

AD