Step-by-Step Guide: Change Maytag Refrigerator Filter
Got a Maytag refrigerator at home? Great! But with time, you may need to change its filter for optimal performance. Don't worry, it's a straightforward task. Let's dive into the step-by-step guide on how to change the filter on your Maytag refrigerator, keeping your drinks cool and fresh.
Before we start, ensure you have a replacement filter ready. Maytag recommends changing the filter every 6 months, or every 300 operating hours. Remember, the lifespan depends on usage and water quality. Once you're set, let's proceed.
Identifying Your Maytag Refrigerator Filter
First, identify the type of filter your Maytag refrigerator uses. Most Maytag fridges come with either a filtered water or an air filter. The water filter is located in the fresh food compartment, while the air filter sits behind the vent on the bottom grille.
For this guide, we'll cover both, so let's dive in.
Changing the Maytag Refrigerator Water Filter
Start by removing the bottom shelf in the fresh food compartment. You'll find the filter housing, labeled as 'Filter,' towards the rear. Press the release button and turn the filter counterclockwise to remove it. Insert your new filter by turning it clockwise until it locks into place.
To confirm a successful filter change, the filter light on your control panel will reset.If not, consult your user manual or contact Maytag support.
Changing the Maytag Refrigerator Air Filter
Find the bottom grille at the front of your refrigerator and remove it. Locate the air filter, which looks like a small, round, plastic grill. Pull it out using your fingers or a flathead screwdriver. Before replacing, check if your new filter is compatible (most are generic). Insert your new filter, ensuring it's properly aligned and secure.
The air filter doesn't have a specific indicator light, but you'll know it's working right when you've placed it correctly and restored airflow.
Resetting Filter Light on Maytag Refrigerator
After changing the filter, you might need to reset the filter light indicator. Here's how:
Locate the 'Filter' button on your control panel, usually nearby the water dispenser or ice maker. Press and hold the button for 3-5 seconds until the filter light turns off. Release the button, and the reset light will start blinking. Press and release the button again, and the light should stay lit, indicating a successful reset.
And there you have it! You've successfully changed the filter on your Maytag refrigerator. Enjoy hassle-free, refreshing drinks and crisp air. Don't forget, regular filter changes keep your fridge running efficiently, saving you from potential repairs down the line. Happy filtering!