how to change coolant on a motorcycle

How to Change Coolant on a Motorcycle

By Richard Williams
AD

Regular maintenance is crucial for ensuring your motorcycle's longevity and optimal performance. One essential maintenance task is changing the coolant, which helps your engine run efficiently and prevents costly damages. So, if you're wondering "how to change coolant on a motorcycle," you're in the right place. This step-by-step guide will walk you through the process safely and effectively.

Before we dive into the process, here are a few things to consider. First, always ensure your motorcycle is on a level surface and has cooled down completely to avoid any burns. Also, gather all the necessary tools and materials, including a new bottle of coolant (ensure it's compatible with your motorcycle), a funnel, a coolant catch basin, and safety gear such as gloves and goggles.

Preparation for Coolant Change

Like any maintenance task, preparation is key. Begin by obtaining your motorcycle's owner's manual, which provides detailed information about your specific model and its coolant requirements.

AD
a person holding a bottle of liquid on top of a motorcycle
a person holding a bottle of liquid on top of a motorcycle
How To Service Your Motorcycling Cooling System | The Shop Manual
How To Service Your Motorcycling Cooling System | The Shop Manual
DIY Bike Oil Change Guide for Beginners
DIY Bike Oil Change Guide for Beginners

Next, locate the coolant reservoirs. They are typically situated at the front of your motorcycle, near the radiator and the water pump. Some motorcycles have a single reservoir, while others have separate reservoirs for the engine and the water pump.

Draining the Old Coolant

The first step in changing the coolant is draining the old one. First, remove the radiator cap, located at the top of the radiator, once your motorcycle has cooled down. Be cautious as pressure may still be present in the system, and hot coolant may release.

a man kneeling down next to a motorcycle
a man kneeling down next to a motorcycle
How to change the coolant on a 1995 Honda Shadow 1100 ACE motorcycle
How to change the coolant on a 1995 Honda Shadow 1100 ACE motorcycle

Using a wrench or socket, loosen and remove the drain plug, usually located at the bottom of the engine or the water pump. Position your catch basin underneath to collect the draining coolant. Allow the old coolant to drain completely.

Flushing the System

After draining the old coolant, it's a good practice to flush the system to remove any remaining coolant and debris. Some riders prefer using a specialized flush, while others use a mixture of water and coolant. Always follow your motorcycle's recommendations.

AD

Pour the flushing solution into the top of the system and allow it to circulate for a recommended period. Then, drain and inspect the system. If necessary, repeat the flushing process until the water runs clear, indicating no more old coolant or debris are present.

Refilling with New Coolant

Now that your motorcycle's cooling system is clean and flushed, it's time to refill it with new coolant. Always use motorcycle-specific coolant, also known as antifreeze, to protect your engine from extreme temperatures and prevent rust and corrosion.

Before refilling, consult your motorcycle's manual to determine the correct coolant-to-water ratio. Typically, this is a 50/50 mix, but some models may require less or more antifreeze, depending on the climate you live in.

AD

Refilling the Coolant

Using a funnel, pour the correct amount of coolant mixture into the radiator until it reaches the "FULL" line or the level recommended in your manual. Be sure not to overfill, as this could cause the coolant to leak.

Replace and tighten the radiator cap. Then, start your engine and allow it to run until it reaches its normal operating temperature. Watch for any leaks, and if none are present, turn off the engine and allow it to cool down.

Checking the Coolant Level

After the engine has cooled, recheck the coolant level. Add coolant as necessary until it reaches the appropriate level. Route the excess coolant, if any, to the other reservoir, if applicable.

AD

Replace the radiator cap once the engine is completely cool. It's essential to wait for your motorcycle to cool down to avoid pressure-related injuries. Finally, clean up the workspace and dispose of the used coolant responsibly.

That's it! You've successfully changed the coolant on your motorcycle. Following this process regularly will maintain your motorcycle's engine health, extending its lifespan and overall performance. Don't forget that regular maintenance is key to enjoying safe and hassle-free riding.

AD