How to Change Code on Cannon Safe
Changing the code on a Cannon safe involves altering the safe's internal settings, most notably its user code and admin code. This process is crucial for enhancing security or when needed due to compromised codes. Here's a step-by-step guide to help you through this process.
Before you begin, ensure you have the current admin code. If you don't, you'll need to contact Cannon's customer service for a master code Reset. Always remember, changing codes involves careful attention to detail and a steady hand.
Understanding Your Cannon Safe's Control Panel
The first step is familiarizing yourself with your safe's control panel. Cannon safes have a simple, backlit panel with buttons for digits 1-9, an 'A' or 'B' button for Letter codes, and function buttons like 'Reset', 'Open', 'Close', 'Lock', and 'Unlock'.
Understanding these buttons is crucial, as changing codes will involve navigating through several menus using these buttons.
Accessing the Safe's Programming Mode
To access your safe's programming mode, follow these steps:
- Open the safe using the current admin code.
- Close the safe door. The LED display should show 'ECOL', indicating the safe is in 'Electronic Lock' mode.
- Press and hold the 'Reset' button for about 5 seconds. The display will show 'PROG' indicating you've entered programming mode.
Changing the Admin Code
Changing the admin code is the first step in enhancing your safe's security. Here's how to do it:
- While in 'PROG' mode, press the '1' button. The display will show 'ID' and the current admin code.
- Press the '2' button. The display will show '>>> '. This indicates you can now input the new admin code.
- Using the number and letter buttons, enter your new 4-digit admin code. Confirm it by re-entering.
- Press the '3' button to save the new admin code. The display will show 'ADMN' and the new code.
Changing User Codes
Now that you've changed the admin code, you can proceed to change user codes for other users with access to your safe.
Follow similar steps as changing the admin code, but start by pressing different buttons (e.g., press 'A' instead of '1') to access different user profiles.
Deleting a User Code
If you want to delete a user code entirely, follow these steps:
- In 'PROG' mode, press the corresponding button for the user code (e.g., 'A', 'B', '1', '2', etc.).
- Press ' &' (ampersand) to delete the code. Confirm by re-pressing ' &'.
Adding a New User Code
To add a new user code, follow these steps after selecting the appropriate user button:
- Press ' > ', then input a new 4-digit code and confirm it.
- Press '3' to save the new code.
After making all the necessary changes, exit the programming mode by pressing '0' or closing the safe door, and lock it using the 'Lock' button. Always test your changes to ensure everything works correctly.
Remember, changing your safe's codes is a critical operation. Be sure to update all users with the new codes and always keep your admin code secure and easily accessible. Happy securing!