how to change cigarette lighter in car

Easy Steps: How To Change Your Car's Cigarette Lighter

By Amanda Smith
AD

Experienced a frustrating click when attempting to light up in your car? The culprit might be a faulty cigarette lighter. Fret not, as changing this component is a straightforward DIY task. Let's dive into how to change a cigarette lighter in your vehicle, step by step.

Before we jump into the process, ensure you have these tools at hand: a screwdriver that matches your vehicle's screw type (usually Phillips or flathead), a pair of pliers, and replacement cigarette lighter.

Preparation and Diagnosis

Identify the problematic lighter by attempting to use it. If it fails to illuminate or doesn't light up consistently, it's likely the element needs replacing.

AD
HOW TO REPLACE CAR CIGARETTE LIGHTER (12V) QUICK AND EASY IN ANY CAR 2018
HOW TO REPLACE CAR CIGARETTE LIGHTER (12V) QUICK AND EASY IN ANY CAR 2018
INSTALL: Cigarette Lighter Replacement | 2002-2007 Subaru Impreza, WRX, & STi
INSTALL: Cigarette Lighter Replacement | 2002-2007 Subaru Impreza, WRX, & STi
How to Fix Car Cigarette Lighter
How to Fix Car Cigarette Lighter

Safety first! Before commencing any work, disconnect your car's negative battery cable to prevent short circuits and potential electrical shocks.

Accessing the Lighter Socket

Locate the cigarette lighter socket. In most modern vehicles, it's positioned in the center console or dashboard. Some vehicles may require removal of a plastic panel or switch console to access the socket.

Replace Power Outlet or Cigarette Lighter GM Vehicle 2000-2006 Suburban, Tahoe, Yukon and Similar
Replace Power Outlet or Cigarette Lighter GM Vehicle 2000-2006 Suburban, Tahoe, Yukon and Similar

Using your screwdriver, carefully remove any screws securing the panel or console. For panels that snap into place, you might need to use a panel removal tool or pry them off gently with a flathead screwdriver. Be cautious not to damage the panels.

Removing the Old Lighter Socket

Unplug the electrical connector from the socket. It might be secured by a clip or friction fit; if so, you may need to use pliers to gently release it.

AD

Remove the socket from the dashboard. You might need to rotate it slightly to disengage it from the hole. Some sockets may have mounting screws that need to be removed first.

Installing the New Cigarette Lighter

Inspect the new cigarette lighter to ensure it's compatible with your vehicle's socket. The design and dimensions should match the original.

Before installation, test the new lighter by plugging it into a known working socket to confirm it functions correctly.

AD

Securing the New Socket

Pass the wiring of the new socket through the dashboard hole where the old one was removed. Ensure the socket's contacts are facing the right direction when it's fully inserted.

Secure the new cigarette lighter socket into place, either by engaging the tabs or screws, depending on your vehicle's design. Ensure it's firmly seated but not over-tightened.

Reconnecting the Electrical Connector

Align the electrical connector's pins with the corresponding slots in the socket. Push the connector in until it locks into place. If it's resistance, double-check your connector alignment.

AD

Reassemble the console or panel by reversing the steps you took to remove it. Ensure all screws are tightly secured, and the panel restored to its original condition.

Reconnect your vehicle's negative battery cable. Turn the ignition on and test your new cigarette lighter. If you've followed all steps correctly, it should light up perfectly. Enjoy your smoke-free ride! Remember, always dispose of cigarette butts responsibly and never leave cigarettes unattended in your vehicle.

AD