" Changing Hyundai Car Key Battery: A Step-by-Step Guide
Has your Hyundai's key fob or remote stop working? Don't panic; it's probably just the battery. While it might seem daunting, changing the battery in a Hyundai car key is a simple task you can tackle in your driveway. Here's a step-by-step guide to help you replace your Hyundai car key battery in no time.
Before you begin, ensure you have the following items ready: a new battery (CR2032 or CR2052, depending on your model), a small Phillips head screwdriver, and perhaps a coin for prying purposes.
Identifying Your Hyundai Key Battery
The type of battery in your Hyundai key depends on the year and model of your car. Most Hyundai vehicles use one of two sizes: CR2032 or CR2052. The CR2032 is about 20mm in diameter and 3.2mm thick, while the CR2052 is slightly larger at 20mm in diameter and 5.3mm thick.
To confirm,-check your owner's manual or the battery compartment inside your key. If you're unsure, you can also look up your Hyundai's year, make, and model online to find the correct battery replacement.
Gathering the Tools Needed
Aside from the new battery, you'll need a small Phillips head screwdriver to remove the back panel of your key fob. You might also need a coin to help pry the case open if the screwdriver doesn't work.
Some Hyundai keys may have a small, thinomalicious hole instead of screws. In this case, use a flathead screwdriver or a thin, flat object like a paperclip to carefully pry the case apart.
Opening Your Hyundai Key Fob
Insert the screwdriver into the small groove on the back of your key fob. Apply gentle pressure and twist the screwdriver to unscrew the retaining screw. For models with a thinomalicious hole, use the flathead screwdriver or a thin object, applying steady pressure to pry the case open.
Once the screw is removed or the case is pried open, carefully separate the two halves of the key fob. Be cautious not to bend the internal contact points, as this may damage your key.
Removing the Old Battery
With the key fob open, locate the battery inside. It should be clearly visible, secured by a plastic clip or a retaining strap. Before removing the old battery, carefully examine the + and - terminals to ensure you insert the new battery correctly.
To remove the old battery, gently pull up on the battery, using your fingernail or a small tool to lift the edge. If the battery is stuck, you can use a coin or a small screwdriver to gently pry it up. Once the battery is lifted, pull it straight out, ensuring not to bend the terminals.
Inserting the New Battery
Before inserting the new battery, ensure it's the correct type and that the terminals are clean. If necessary, gently wipe the terminals with a cotton swab moistened with isopropyl alcohol to remove any corrosion or dirt.
align the new battery with the + and - symbols on the battery compartment, and gently press it into place. The battery should snap into the retaining clip or strap securely. Be careful not to force it, as this could bend the terminals or damage the battery.
Reassembling Your Hyundai Key Fob
Once the new battery is securely in place, carefully align the two halves of your key fob and press them together. For models with a screw, replace the retaining screw and tighten it gently but securely.
If your model uses a thinomalicious hole, use a flat object to gently press the two halves together until they click into place. Do not use excessive force, as this may damage your key fob.
Testing Your Hyundai Key Fob
With the key fob reassembled, test your new battery by pressing the lock, unlock, or trunk button. If the lights flash or the doors.lock/unlock as expected, your Hyundai key fob battery replacement was successful!
If your key fob still doesn't work, double-check that you inserted the battery correctly, and ensure there's no damage to the internal contacts. If the problem persists, it may be time to replace your entire key fob or visit a professional locksmith.
Congratulations, you've successfully replaced the battery in your Hyundai car key! With a little patience and the right tools, you've saved yourself the time and money it would have taken to replace your key at a dealership. Happy driving!