how to change brake light toyota corolla

How to Change Brake Lights on Toyota Corolla

By Mark Taylor
AD

INPUT: Are your brake lights on the fritz? Don't let this safety issue linger. If you're driving a Toyota Corolla, we're here to guide you through the process of how to change brake light in your vehicle. Let's dive in and keep your Corolla and its occupants safe with fully functioning brake lights.

Safety First: Gather Your Tools and Supplies

Before you start, here's what you'll need:

  • New brake light bulbs (for your specific Toyota Corolla model)
  • Mechanic gloves to protect your hands
  • Wheel wedges or chocks to secure your vehicle
  • Flathead screwdriver
  • Rubber or plastic ponytail bands

Secure Your Vehicle

First, make sure your vehicle is safe. Park it on a level surface and turn off the engine. Next, engage the parking brake and use wheel wedges or chocks to secure the rear wheels. This prevents the vehicle from rolling while you're working.

Locate the Brake Light Assembly

Now, open the trunk and look towards the rear of your vehicle. You should see the brake light assembly, consisting of the taillight and brake light housing. Take note of the two types of bulbs - the brake light and the taillight - they're different and you'll want to replace them with correct new ones.

Removing the Old Brake Light Bulbs

Before you remove the old bulbs, make sure your hands are clean to avoid any potential damage to the bulbs or your vehicle's electrical components. Now, let's remove the faulty bulbs:

Taillight Bulb Replacement

Insert a flathead screwdriver between the taillight lens and the trim. Carefully pry the lens off. Then, use your screwdriver to remove the bulb's retainer clip. Gently pull the bulb out and discard it. Take note of how the new bulb is positioned for later reference.

Brake Light Bulb Replacement

Now, move on to the brake light bulb. It's typically located behind a rubber boot. Twist the boot counterclockwise and pull it off. You should now see the brake light bulb. Removal is similar to taillight bulbs - remove the retainer clip and pull out the old bulb. Once again, note the new bulb's position for easy installation.

Installing the New Brake Light Bulbs

Now that the old bulbs are out, it's time to install the new ones. Start with the brake light bulb:

Brake Light Bulb Installation

Insert the new brake light bulb, ensuring it's correctly positioned as you noted earlier. Replace the rubber boot, twisting it clockwise until it's firmly seated. Test the new brake light by having someone press the brake pedal while you're in the trunk area.

Taillight Bulb Installation

For the taillight, replace the bulb's retainer clip and position the new bulb as it was previously. Gently push the taillight lens back into place, ensuring it's securely snapped into the trim. Test both taillights as well.

There you have it! You've successfully changed your Toyota Corolla's brake lights. Regularly checking and replacing your vehicle's lights is a crucial part of maintenance, ensuring your safety and that of other drivers on the road. Keep a spare set of bulbs in your vehicle, and these steps should be a breeze. Happy driving!

Replace 2003-2008 Toyota Corolla Tail Light / Bulb, How to Change Install 2004 2005 2006 2007
Replace 2003-2008 Toyota Corolla Tail Light / Bulb, How to Change Install 2004 2005 2006 2007
2014 To 2019 Toyota Corolla How To Change Tail Light Bulbs With Part Numbers - Quick & Easy
2014 To 2019 Toyota Corolla How To Change Tail Light Bulbs With Part Numbers - Quick & Easy
How to Change Dashboard Lights Toyota Corolla
How to Change Dashboard Lights Toyota Corolla
2009 To 2013 Toyota Corolla How To Change Tail Light Bulbs - Quick & Easy Version
2009 To 2013 Toyota Corolla How To Change Tail Light Bulbs - Quick & Easy Version
2020 To 2024 Toyota Corolla How To Change Map Light Bulbs With Part Number
2020 To 2024 Toyota Corolla How To Change Map Light Bulbs With Part Number
AD