Step-by-Step: Change Blades on Husqvarna Zero Turn Mower
If you're a proud owner of a Husqvarna ZT mower, you'll eventually need to know how to change blades for optimal performance. Regular blade maintenance ensures a clean cut and prolongs the life of your machine. Here's a comprehensive guide on how to safely and effectively change blades on your Husqvarna zero turn mower.
Before we dive into the process, ensure you have the following tools and items ready: a breaker bar or a socket wrench, new mower blades, and safety glasses. Always prioritize safety by wearing appropriate clothing, gloves, and footwear while working on your mower.
Preparation and Safety Measures
Find a flat, open area to work on your mower. Turn off the engine and remove the ignition key to prevent accidental start-up. Allow the mower to cool for about 30 minutes to avoid burns from the hot engine and exhaust.
Engage the parking brake and utilize wheel chocks or cinder blocks to secure the mower in place. Locate the power take-off (PTO) safety switch, usually under the mower deck, and disengage it. This crucial step ensures that the blades do not rotate unexpectedly during the blade change process.
Removing the Old Blades
Lay down an old blanket or sheets beneath the mower to protect the grass from debris. Start by removing the fasteners securing the blades to the mower's spindle. Counterclockwise rotation is typically used to loosen the bolts using a wrench or breaker bar. If you encounter difficulty, you can use an impact wrench to break the bolts free.
Once all bolts are loose, gently lift the blades off the spindle. Be cautious of the sharp edges and any remaining debris that may fly off during removal. After removing the old blades, inspect the spindle and the underneath of the mower deck for any obstruction, cleaning if necessary.
Preparing the New Blades
Before installing new blades, ensure they are the correct type and size compatible with your Husqvarna zero turn mower. Check the owner's manual or consult a Husqvarna dealer if you're uncertain about blade compatibility. Use a sharpening stone, a grinder, or a dedicated blade sharpener to ensure the cutting edges are acute and clean.
Inspect the blade's balance by holding it by the center hole and attempting to balance it horizontally. If it wobbles or is unbalanced, it will need to be re-sharpened or re-balanced before installation. Husqvarna recommends blade sharpening every 25 hours of operation, so keep a record of your mower's hours for future reference.
Installing the New Blades
Position the new blades with the beveled side facing down, allowing for proper cutting action. The blade's manufacturer usually marks the top with an "UP" arrow or indicates the beveled edge. After placing the blades on the spindle, align the blade's keyway with the spindle's key to ensure proper rotation.
Hand-tighten the bolts by threading them clockwise onto the spindle's threads. Tighten evenly in a crisscross pattern, similar to inflating a tire, to ensure balanced torque distribution. Husqvarna recommends applying 17-25 foot-pounds of torque when tightening the bolts, which is roughly equivalent to 150-225 inch-pounds. Consult your owner's manual for the specific torque value for your mower model.
Re-Engage the PTO and Test the Blades
Re-engage the PTO safety switch after ensuring all bolts are correctly tightened. Remove the mower's deck washers and levers, then lower the deck to its normal operating position. Engage the parking brake once more before starting the engine.
With the engine running, allow the blades to rotate at full speed for about a minute to ensure they spin freely and evenly. At this point, you can also check the blade alignment, as misaligned blades may cause uneven cutting or damage to the mower deck. If everything checks out, raise the mower deck, disengage the parking brake, and you're ready to mow with your newly installed blades.
Regularly maintaining your Husqvarna zero turn mower's blades, including periodic sharpening and balancing, will ensure optimal performance and longevity. Keep an eye on your mower's hours and always prioritize safety when performing maintenance tasks. Happy mowing!