Mastering The DW735: Step-by-Step Guide to Change Blades on Your Dewalt Planer
Looking to upgrade the cutting power of your DeWalt DW735 planer? A frequent blade change ensures optimal performance, and we're here to guide you through the process. This comprehensive guide will walk you through the steps, from gathering necessary tools to understanding the types of blades available and the correct installation procedure.
Before we delve into the details, let's discuss why changing blades on your DeWalt DW735 is crucial. Regular blade changes maintain the accuracy and efficiency of your planer. Dull blades result in poor cutting quality, increased effort, and potentially dangerous situations. So, let's ensure your DW735 performs at its best by staying up-to-date with blade maintenance.
Understanding DeWalt DW735 Blades
The DeWalt DW735 uses 12.5-inch, 40-tooth blades designed for power and precision. Familiarizing yourself with the different blade types will help you choose the right one for your specific needs:
- Standard (Lumber): These are the general-purpose blades used for most woodworking applications. They provide a balance between power and smoothness.
- Bridging (Anti-Snipes): Designed to reduce or eliminate snipe – the uneven cut at the beginning or end of a board due to blade depth changes. These blades have a larger kerf (cutting width) to help maintain consistent depth.
When to Change Your Blades
Recognizing the signs of a worn-out blade is essential to maintain optimal performance. Here are some indications that it's time for a change:
- Dull Edges: Over time, blade edges wear down, reducing their ability to make clean cuts. Blades may start to tear or burn the wood instead of slicing through it smoothly.
- Visible Dents or Chips: Impacts during use can cause blade teeth to chip or break, leading to subpar cuts and decreased performance.
- Uneven Cuts: Blades change their angle ever so slightly over time, causing an uneven or wavy cut. This phenomenon, known as banana cutting, is an indication that your blade needs replacing.
Safety Precautions Before Blade Change
Safety should always be your top priority when working with power tools. Follow these guidelines before changing blades:
- Unplug: Always ensure the DeWalt DW735 is unplugged from the power source to prevent any accidents.
- Support the Blade: Use a sturdy, flat surface to support the blade while changing it. This minimizes the risk of personal injury and ensures a smooth process.
- Wear Appropriate Safety Gear: Use work gloves, safety glasses, and a dust mask to protect yourself during the blade change process.
Changing Blades on Your DeWalt DW735
Now that you're familiar withלים the types of blades and when to change them, let's guide you through the actual process of replacing the blade on your DW735 planer:
First, you'll need to gather the following tools:
- Replacement Blade: Ensure you have a compatible, high-quality blade on hand.
- Screwdriver (Phillips #2): The DW735 uses Phillips-head screws to secure the blade.
- Allen Wrench (usually included with the tool): This is used to loosen and tighten the blade clamp.
Removing the Old Blade
Unscrew the two Phillips-head screws that secure the blade guard to the planer. Lift the guard off and set it aside, revealing the blade. Then, perform the following steps:
- Use the Allen wrench to loosen the blade clamp screw counterclockwise until it's no longer securing the blade.
- With the clamp released, carefully slide the old blade out of the blade holder, making sure to respect the blade's sharp edges.
Installing the New Blade
Before installing the new blade, ensure it's clean and free of any debris. Follow these steps to install the new blade:
- Slide the new blade into the blade holder, ensuring the tooth side faces down, with the teeth invested in the material.
- Tighten the blade clamp screw clockwise using the Allen wrench. Secure it firmly, but be careful not to over-tighten and risk warping the blade or damaging the clamp.
- Re-secure the blade guard using the two Phillips-head screws. Ensure it's properly aligned and fully engaged with the planer.
With the new blade securely installed, you're ready to resume using your DeWalt DW735 planer with renewed cutting power and accuracy.
Sharpening and Balancing Your Blades
To extend the life of your blades and maintain optimal performance, consider sharpening and balancing your blades periodically. This process involves:
- Sharpening: Using a blade sharpener or a grinding wheel to restore the blade's cutting edge.
- Balancing: Ensuring that the blade's center of gravity is evenly distributed. An unbalanced blade will vibrate excessively, leading to quicker wear and decreased performance.
It's essential to follow the manufacturer's instructions for sharpening and balancing your blades to maintain their longevity and ensure optimal results.
Proper Care of Your DeWalt DW735 Planer
Regular maintenance plays a significant role in preserving your DeWalt DW735's performance and extending its lifespan. Some general care tips include:
Cleanliness
Regularly clean your planer, removing dust and debris from the motor, blade, and external surfaces. This will help prevent rust, maintain performance, and prolong the tool's life.
Storage
Store your DeWalt DW735 in a dry, cool place, preferably with the blade removed to prevent any accidents. Using a tool bag or Cabinet will also help protect your investment from dust and minor impacts.
In conclusion, changing blades on your DeWalt DW735 is a straightforward process that, when performed regularly, ensures your tool remains powerful and efficient. Always prioritize safety, and follow the guidelines provided above for the best results. Happy woodworking!