how to change blade on andis clippers

How to Change Blade on Andis Clippers

By Kevin Smith
AD

If you're a devoted user of Andis clippers, you might have found yourself in need of changing the blade to ensure optimal performance and clean cuts. Changing the blade on your Andis clippers is a straightforward process that we'll guide you through today. Let's dive right in!

Before we start, it's essential to ensure your clippers are clean and dry. This prevents any damage to the blade and ensures a smooth replacement process. Now, let's get into the step-by-step guide.

Gathering Your Tools and Materials

The first step is to gather all the necessary tools and materials. You'll need your Andis clippers, a new blade (ensure it's compatible with your clipper model), a Phillips #1 screwdriver, and, optionally, some blade oil for maintenance.

AD
How To Sharpen Clipper Blades With Sandpaper? | How To Sharpen Clipper Blades
How To Sharpen Clipper Blades With Sandpaper? | How To Sharpen Clipper Blades
How To Clean Clipper Blades
How To Clean Clipper Blades
How to sharpen hair clippers
How to sharpen hair clippers

It's crucial to purchase the correct blade for your Andis clipper. Andis offers a range of blades, including T-blade, C-T2 blade, and T-Edger blade, each designed for specific tasks. Always consult your clipper's manual or Andis' website to confirm the appropriate blade.

Removing the Old Blade

Now that you have everything ready, let's remove the old blade. Begin by turning off and unplugging your clippers to ensure safety. Next, locate the two screws on either side of the blade. Using your Phillips #1 screwdriver, gently loosen and remove these screws.

How to replace an Andis Blade Drive
How to replace an Andis Blade Drive
De-gunk & Disinfect your Clippers with Sid Sottung | Andis
De-gunk & Disinfect your Clippers with Sid Sottung | Andis

A helpful tip here is to keep track of the screws and any small parts to avoid losing them. Once the screws are removed, the old blade should lift off easily. If it's stuck, gently use a flathead screwdriver or a coin to pry it off. Be careful not to damage the clipper's body.

Cleaning the Blade Assembly

With the old blade removed, it's an excellent time to clean the blade assembly. This step is crucial as it helps maintain your clipper's performance and life. Use a soft-bristled brush or a damp cloth to remove any hair or debris from the assembly.

AD

If your clipper has a lubrication port, apply a few drops of blade oil to keep the mechanism running smoothly. However, be cautious not to over-lubricate, as this can attract dirt and cause damage. Andis recommends lubricating their clippers every 15 to 20 hours of use, or as needed.

Installing the New Blade

Now that your clipper is clean and prepped, let's install the new blade. Start by aligning the new blade with the groove in the clipper's body. Ensure the blade's teeth are facing the correct direction – away from the clipper's handle.

A common question at this point is whether to change the blade's position for a different cutting length. Andis blades are designed to adjust the cutting length by moving the blade up or down. To adjust, simply slide the blade along the groove until you reach your desired cutting length. Remember, moving the blade closer to the clipper's body results in a shorter cut.

AD

Securing the New Blade

With the new blade in place, it's time to secure it with the screws you removed earlier. Gently place the screw heads into the screw holes on either side of the blade. Using your Phillips #1 screwdriver, tighten the screws evenly and securely. Be careful not to overtighten, as this can strip the screw holes or damage the blade.

Once the screws are securely tightened, your new blade is ready to use. Before you dive into your next grooming session, it's a good idea to test the new blade on a small, hidden area to ensure it's working correctly and delivering the desired cut length.

Regular Maintenance

To keep your Andis clippers in tip-top shape, regular maintenance is essential. Besides changing the blade regularly, clean your clippers after each use to prevent hair and debris buildup. Additionally, store your clippers in a cool, dry place to prevent rust and maintain overall performance.

AD

Finally, it's recommended to inspect your clipper's blades regularly to assess their condition. Blades that are nicked, dull, or otherwise damaged should be replaced promptly to ensure clean, precise cuts and prevent skin irritation.

And there you have it – a comprehensive guide on how to change the blade on your Andis clippers. By following these steps and maintaining your clippers regularly, you'll ensure years of reliable, high-performance grooming. Happy clipping!

AD