how to change battery in vivint glass break sensor

Step-by-Step: Changing Battery in Vivint Glass Break Sensor

By Robert Lee
AD

Discovering that your Vivint Glass Break Sensor's battery has drained can be concerning, especially if you rely on your home security system. However, replacing the battery is a straightforward task that you can accomplish at home. Continue reading to learn how to change the battery in your Vivint Glass Break Sensor, ensuring the safety and security of your home.

Your Vivint Glass Break Sensor is an integral part of your home security system, detecting the sound of breaking glass and alerting your monitoring center. To maintain its effectiveness, it's crucial to replace the battery when it gets low. Here's a simple step-by-step guide on how to accomplish this.

Understanding Your Vivint Glass Break Sensor's Battery

Your Vivint Glass Break Sensor uses a standard 3-volt lithium battery, which typically lasts for about three years. The battery cannot be recharged, so it needs to be replaced once it's used up. Vivint suggests replacing the battery annually for optimal performance.

AD
How To Change Battery In ADT Glass Break Sensor – Storables
How To Change Battery In ADT Glass Break Sensor – Storables
How to Remove Glass Break Sensor Cover | 6 Easy Processes (2026)
How to Remove Glass Break Sensor Cover | 6 Easy Processes (2026)
How to Reset Battery Current Sensor
How to Reset Battery Current Sensor

Before you start, make sure you have the following items on hand:

  • Replacement battery (3V lithium CR2032)
  • Coin cell battery removal tool or a flathead screwdriver
  • New batteries for your Vivint home security panel (optional)

Locating the Battery in Your Sensor

Your Glass Break Sensor's battery is located behind a small door on the device. The door is labeled "Battery" and is located on the back of the sensor, near the mounting screws. Use your fingernail or a coin to gently pry open the door and access the battery compartment.

How to Change Battery in Simplisafe Glass Break Sensor (2026)
How to Change Battery in Simplisafe Glass Break Sensor (2026)
How to Open Simplisafe Glass Break Sensor | 2 Easy Methods
How to Open Simplisafe Glass Break Sensor | 2 Easy Methods

Once the door is open, you'll see the battery inside. It's important to ensure that you're replacing the correct battery. Your Vivint Glass Break Sensor uses a 3-volt lithium CR2032 battery, which is a common battery found in many electronic devices.

Removing the Old Battery

Using your coin cell battery removal tool or a flathead screwdriver, carefully pry the old battery out of the compartment. The battery should pop out easily. If it's stuck, gently wiggle it back and forth until it's loose enough to remove.

AD

It's important not to touch the positive and negative terminals of the battery at the same time to avoid creating a short circuit. If you accidentally short the battery, it may leak or cause damage.

Installing the New Battery

Now that you've successfully removed the old battery, it's time to insert the new one. First, make sure that the new battery is correctly oriented and positioned, with the positive and negative terminals lined up with the contacts in the compartment.

Gently press the new battery into the compartment, ensuring that it's fully seated and making contact with both terminals. The battery should fit snugly, with no wobbling or movement. If the battery doesn't seem to fit, double-check the battery's orientation and ensure that it's the correct type.

AD

Testing the New Battery

After installing the new battery, close the battery door and secure it using the small latch. Now it's time to test the battery to ensure that it's working correctly. To do this, press the "Test" button on your Glass Break Sensor.

If the sensor chimes and the Vivint panel shows a "Test Successful" message, your new battery is installed correctly and is working properly. If the test fails, double-check that the battery is installed correctly and lining up with the contacts. If you're still having issues, contact Vivint's customer support for further assistance.

Replacing the Battery in Your Vivint Panel (Optional)

While you're replacing the battery in your Glass Break Sensor, it's a good idea to check the battery in your Vivint home security panel as well. The panel uses four AA lithium batteries, which should last about a year or more, but it's always a good idea to check them regularly.

AD

Replacing the batteries in your Vivint panel is a similar process to replacing the battery in your Glass Break Sensor. First, locate the battery compartment on the back of the panel. Use a coin or your fingernail to open the compartment door. Remove the old batteries and replace them with new ones, ensuring that they're correctly oriented. Close the compartment door and test the new batteries by pressing the "Test" button on the panel.

Congratulations, you've successfully changed the battery in your Vivint Glass Break Sensor! Regularly checking and replacing the batteries in your home security devices is an essential part of maintaining your home's security. Keep an eye on your Vivint Glass Break Sensor and your Vivint home security panel, and make sure to replace the batteries annually to ensure optimal performance.

AD