how to change battery in timex expedition

Step-by-Step: Change Battery in Timex Expedition

By Robert King
AD

Ever found yourself in the great outdoors with a Timex Expedition that's suddenly going slow or stopped altogether? Replacing the battery can get your watch ticking again. Here's a step-by-step guide on how to change the battery in your Timex Expedition.

Before we start, ensure you've got a flathead screwdriver, the new battery (typically a CR2032), and a clean, well-lit workspace. Also, if your watch is under warranty, changing the battery yourself might void it, so consider contacting Timex customer service first.

Gathering Materials and Preparation

The first step is to gather all necessary tools and materials. You'll need:

AD
How to Change a Watch Battery
How to Change a Watch Battery
someone is removing the motherboard from their watch
someone is removing the motherboard from their watch
Master Your Time: A Step-by-Step Guide to Perfectly Adjusting Your Timex Watch Band!
Master Your Time: A Step-by-Step Guide to Perfectly Adjusting Your Timex Watch Band!
  • A replacement battery (usually a CR2032)
  • A flathead screwdriver (usually comes with the watch)
  • A clean, well-lit workspace

Identifying Your Battery Type

Timex Expedition watches use coin cell batteries, typically a CR2032. Check your watch's manual or look at the current battery's imprint to confirm. If it's not a CR2032, you might need to visit a watch store or Timex customer service to find the correct replacement.

Preparing the Watch

Check if your watch has any additional features like an altimeter, compass, or thermometer. If so, set the watch to the time mode to avoid any potential damage to these features during battery replacement.

Wrist Watch Battery Replacement Chart
Wrist Watch Battery Replacement Chart
TIMEX T45181 Expedition WR 100m Resin Combo Review
TIMEX T45181 Expedition WR 100m Resin Combo Review

Removing the Battery Door

Timex Expedition watches have a simple, screw-on battery door. Here's how to remove it:

Locating the Battery Door

The battery door usually has a small indentation or arrow marking the position of the battery. It's often located on the side or back of the watch case.

AD

Removing the Door

Use the flathead screwdriver to carefully unscrew the battery door. Turn the screwdriver counterclockwise until the door pops off.

Battery doors can be tight, and it might take some gentle force. If you feel any resistance, double-check you're turning the screwdriver in the right direction.

Removing and Installing the Battery

Now that the battery door is off, you can remove the old battery and replace it.

AD

Removing the Old Battery

Use the flathead screwdriver to gently pry the old battery from its slot. The battery should lift out easily. Note the positive (usually indicated by a '+' sign) and negative (-) sides of the battery before removing it.

Installing the New Battery

Insert the new battery into the slot with the positive side facing up. Make sure the battery is fully seated. The battery should fit perfectly and won't wiggle when properly seated.

Reassembling Your Timex Expedition

With the new battery installed, it's time to put everything back together.

AD

Securing the Battery Door

Carefully align the battery door with the watch case, making sure the battery is fully seated and not getting in the way. Using the flathead screwdriver, screw the door back onto the watch. Turn clockwise and tighten until secure. Be careful not to overtighten and strip the threads.

Resetting the Watch

Once the battery door is secure, it's time to set your watch to the correct time. Check that the second hand is moving and set the time according to your location.

Congratulations! You've successfully changed the battery in your Timex Expedition. Always remember to replace your watch's battery every 12-18 months to maintain optimal performance. Happy wandering!

AD