how to change battery in mazda 3 key fob

Step-by-Step: Change Mazda 3 Key Fob Battery

By Melissa Brown
AD

Every vehicle owner, including Mazda 3 drivers, knows the inconvenience of a drained key fob battery. Fortunately, replacing it is a quick and easy process you can do yourself. This guide will walk you through the steps needed to change the battery in your Mazda 3 key fob.

Before you start, gather a few tools: a small flathead screwdriver, a new CR2032 coin cell battery, and your Mazda 3 key fob. Ensure you have the right battery type, as using the wrong one can cause damage or malfunctions.

Preparing to Replace the Battery

Most Mazda 3 key fobs use a CR2032 battery. Double-check your current battery to ensure you purchase the correct replacement. You can usually find CR2032 batteries at electronics stores, auto parts shops, or online.

AD
How to Change Key FOB battery for Mazda CX-7
How to Change Key FOB battery for Mazda CX-7
Mazda key fob battery replacement (Mazda 3, CX-5)
Mazda key fob battery replacement (Mazda 3, CX-5)
How to Change the Battery in Your Car Key Fob
How to Change the Battery in Your Car Key Fob

Once you have the new battery, locate your Mazda 3's key fob's small, flat slot on the side. This is where you'll insert the screwdriver to open the fob.

Opening the Mazda 3 Key Fob

Insert the flathead screwdriver into the slot. Apply gentle pressure and twist the screwdriver to pry open the key fob case. Be careful not to apply too much force, as this could damage the fob.lide

Mazda-Mazda3-Key-Fob-Battery-Replacement-Guide-001
Mazda-Mazda3-Key-Fob-Battery-Replacement-Guide-001
How To Replace A Battery In A Mazda Key Fob
How To Replace A Battery In A Mazda Key Fob

Once you hear the case unlatch, gently pull the two halves apart. Inside, you'll see the battery compartment. Before removing the old battery, note the position of the positive and negative terminals to help you install the new battery correctly.

Removing the Old Battery

Use your fingertips or tweezers to carefully remove the old battery from the compartment. Be sure not to touch the battery's terminals with your fingers, as the oils on your skin can cause corrosion.

AD

If the old battery is stuck, try using a small, flat tool like a guitar pick or a thin, flat piece of plastic to gently lift it out. Once removed, discard the old battery according to your local recycling guidelines.

Installing the New Battery

Compare the new CR2032 battery to the old one to ensure they are the same size and polarity. The positive terminal should have a "+" sign or be marked with a "+" symbol. Ensure the new battery faces the same way in the compartment.

Place the new battery into the compartment, matching the "+" sign with the correct terminal on the fob's circuit board. Gently press the battery down, ensuring it makes proper contact with both terminals. You should hear a faint click when the battery is seated correctly.

AD

Reassembling the Mazda 3 Key Fob

Carefully align the two halves of the key fob case. Press them together gently but firmly until you hear the case relatch. You may need to press multiple times around the edges to ensure all locks engage.

Once the key fob is reassembled, test the battery by pressing the lock or unlock button. If your Mazda 3 beeps and the lights flash, your new battery is working properly. If not, carefully open the fob again to ensure the battery is properly seated and retry.

Congratulations, you've successfully changed the battery in your Mazda 3 key fob! Always remember to keep a spare battery on hand to avoid getting locked out in the future. Happy driving!

AD
AD