how to change battery in lexus key fob rx350

Swift Lexus Key Fob RX350 Battery Switch: Easy DIY Steps

By Laura Harris
AD

Ever found yourself locked out of your Lexus RX350 because your key fob's battery has died? You're not alone. But don't worry, replacing the battery in your Lexus key fob is a straightforward task that anyone can do. Let's dive into a step-by-step guide on how to change the battery in your Lexus RX350 key fob.

Before we start, make sure you have a replacement battery. The Lexus RX350 uses a CR2032 3V lithium battery, which you can find at most electronics stores or online. Having the right tools handy will make the process smoother. You'll need a small flathead screwdriver and a coin (if your screwdriver doesn't work) to remove the key fob's back cover.

Disassembling the Key Fob

The first step is to disassemble your Lexus key fob. Don't be intimidated by the process; it's simpler than it looks.

AD
Lexus ES350 Key Fob Battery Replacement (CR1632) | Easy 2-Minute DIY
Lexus ES350 Key Fob Battery Replacement (CR1632) | Easy 2-Minute DIY
DIY - LEXUS How to change SmartKey Key fob Battery on Lexus RX350 ES350 RX450
DIY - LEXUS How to change SmartKey Key fob Battery on Lexus RX350 ES350 RX450
How to ● Lexus Key Fob Remote Keyless Battery Replace HS, ES, GS, LS, IS, GX, CT
How to ● Lexus Key Fob Remote Keyless Battery Replace HS, ES, GS, LS, IS, GX, CT

Start by locating the small hole on the side of your key fob. If your key fob has buttons, it's likely on the edge near the bottom. If it's a sleek, buttonless model, you might find it on the back.

Removing the Bottom Cover

Using your flathead screwdriver or a coin, gently push the tip into the hole. Apply a little pressure and twist slightly until the cover pops off. If your key fob has buttons, you might need to use the coin to avoid damaging the buttons.

How To Replace A 2010 - 2020 Lexus GX460 Remote Key Fob Battery - Remove Change Smart Key Battery
How To Replace A 2010 - 2020 Lexus GX460 Remote Key Fob Battery - Remove Change Smart Key Battery
How to Change the Battery in Your Car Key Fob
How to Change the Battery in Your Car Key Fob

Once the cover is off, you'll see the battery nestled inside. There's no need to remove any springs or clips; the cover just snaps onto the main body of the key fob.

Locating the Battery

Now that the bottom cover is off, you'll see the battery sitting in a small compartment. The CR2032 battery has a positive side with a plus sign (+) and a negative side. It's essential to orient the new battery the same way as the old one to ensure your key fob works correctly.

AD

The positive side of the battery faces the same direction as the keyhole on your key fob. If you're looking at the battery from the front, the + sign should be on the left side.

Replacing the Battery

With the battery exposed, it's time to replace it with the new one.

First, carefully remove the old battery. If it's stuck, you can use the flathead screwdriver to gently pry it out. Be careful not to bend the battery; they're fragile and can leak harmful chemicals if damaged.

AD

Removing the Old Battery

Once the old battery is out, compare it to the new one to ensure they're identical. The new battery should fit perfectly into the compartment.

Place the new battery in the compartment with the positive side facing the same direction as the old battery. Again, the + sign should be on the left side if you're looking at it from the front.

Inserting the New Battery

Gently push the new battery into the compartment until it's firmly seated. Make sure the + sign is oriented correctly. If the battery doesn't fit or feels too loose, double-check that you're using the correct battery type.

AD

Now that the battery is in place, it's time to put the key fob back together.

Reassembling the Key Fob

Reassembling the key fob is as simple as reversing the disassembly process.

First, align the bottom cover with the main body of the key fob. If your key fob had buttons, make sure they're aligned correctly. You might need to use the coin or flathead screwdriver to gently press the cover back into place.

Reattaching the Bottom Cover

Once the cover is aligned, press firmly and evenly until it snaps back into place. You should hear a slight click when it's secure. If it's not snapping back or feels loose, double-check that the battery hasn't shifted out of place.

With the cover back on, your Lexus RX350 key fob should be as good as new. Don't forget to test it by locking and unlocking your car to ensure it's working correctly.

And there you have it. Changing the battery in your Lexus RX350 key fob is a quick and easy process that anyone can do. Now you can get back on the road and enjoy your vehicle without worrying about a dead key fob. Safe driving!

AD