how to change battery in key fob dodge journey

Step-by-Step: Change Battery in Dodge Journey Key Fob

By William Miller
AD

Ever found yourself resigned to using your spare key to unlock your Dodge Journey because your fob's battery has given out? Although it might seem like a daunting task, replacing the battery in your key fob is surprisingly simple. This guide will walk you through the process, ensuring you're back on the road in no time.

First, it's important to note that the process involves handling some small parts, so make sure you're working in a well-lit area with a flat surface. Also, having a replacement CR2032 coin cell battery on hand will make the process smoother. Now, let's dive into the step-by-step guide.

Gathering Tools and Materials

Before you start, ensure you have all the necessary tools and materials. Besides the replacement battery, you'll need:

AD
Dodge key fob battery replacement ( Grand Caravan)
Dodge key fob battery replacement ( Grand Caravan)
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet
How to Change the Battery in Your Car Key Fob
How to Change the Battery in Your Car Key Fob
  1. A flathead screwdriver.
  2. Double-sided tape or a strong adhesive to secure the new battery.

Preparing Your Key Fob

Begin by locating the small pinhole on the side of your key fob, just above the keyring slot. This is where you'll insert the screwdriver.

Once you've inserted the flathead screwdriver into the pinhole, apply a small amount of pressure to release the clip holding the fob together. You should hear a click and feel the two halves of the fob separate. Gently pull the halves apart.

DIY - Lincoln Key Fob - How to change SmartKey Key fob Battery MKX MKC MKZ
DIY - Lincoln Key Fob - How to change SmartKey Key fob Battery MKX MKC MKZ
How to Change the Battery in a Jeep Key Fob: Easy DIY Guide - Ran When Parked
How to Change the Battery in a Jeep Key Fob: Easy DIY Guide - Ran When Parked

Removing the Battery and Case

Inside the fob, you'll see a small circuit board with the old CR2032 battery attached. The battery is held in place by a thin metal clip at the top and double-sided tape at the bottom.

Removing the Battery

Use the flathead screwdriver to carefully pry up the thin metal clip holding the battery in place. Once the clip is removed, you should be able to lift the battery out of the fob. Be cautious not to snap the clip or damage the circuit board.

AD

If the battery is secured with double-sided tape, gently apply some pressure with the screwdriver to lift the battery off the tape. Don't worry if the tape tears; you'll use new tape to secure the new battery.

Installing the New Battery

With the old battery removed, it's time to install the new one. Align the new CR2032 battery with the groove on the circuit board, making sure the positive side (+) faces up.

Securing the Battery

Press the new battery into place. The groove on the circuit board should hold the battery in position. Apply a small amount of double-sided tape to secure the battery at the bottom. Ensure the tape covers the battery's edge to prevent it from moving around in the future.

AD

Replace the metal clip at the top to hold the battery in place. Make sure the clip snaps back into position, securing the battery.

Reassembling Your Key Fob

Now that the new battery is firmly in place, it's time to put the key fob back together. Align the two halves of the fob and press them together until you hear the latching clip snap back into place.

Give your key fob a test by pressing the locks. You should hear the familiar beeps, confirming your Dodge Journey's doors locks and unlocks are working as they should. With the battery change complete, you're ready to get back on the road, confident that your key fob is in prime working condition. Happy driving!

AD
AD