how to change battery in ipod

Change Ipod Battery: A Step-by-Step Guide

By Joseph Young
AD

Do you find that your iPod's battery life isn't quite what it used to be? Fear not, giving your iPod a new lease on life might be as simple as swapping out the battery. This guide will walk you through the process, step-by-step, so you can enjoy your iPod to the fullest again.

Before we dive in, remember that changing the battery in your iPod voids its warranty. Also, the procedure varies slightly depending on your iPod model. This guide targets the iPod Classic (160GB).

Gather Your Tools and Materials

The first step in changing your iPod's battery is gathering the necessary tools and materials. You'll need:

AD
How to replace your iPod touch battery
How to replace your iPod touch battery
How to Replace the Battery in an iPod or iPod Classic (5th, 6th and 7th Gen)
How to Replace the Battery in an iPod or iPod Classic (5th, 6th and 7th Gen)
the instructions for how to use an electronic device with scissors and other items in it
the instructions for how to use an electronic device with scissors and other items in it
  • An iPod Classic (160GB)
  • Replacement battery (original iPod batteries part number: 616-0516, compatible alternatives available)
  • A precision Phillips #00 screwdriver
  • A small plastic opening tool or a spudger
  • Anti-static precautions: work on a non-static surface and ground yourself to prevent electrostatic discharge.

Preparing Your iPod for Battery Replacement

Begin by turning off your iPod and removing any protective cases or covers. With the iPod facing down, carefully insert the plastic opening tool into the seam along the bottom edge and gently pry the back cover off. You may need to use some force, but be careful not to damage the case.

Exposing the iPod's internal components requires removing 18 Phillips screws. After removing the screws, use the plastic opening tool to gently pry the back cover away from the front. Be careful not to damage the ribbon cable connecting the screen to the main board.

How to Replace the Battery in an iPod or iPod Classic (5th, 6th and 7th Gen)
How to Replace the Battery in an iPod or iPod Classic (5th, 6th and 7th Gen)
Change battery iPod Shuffle Gen 2
Change battery iPod Shuffle Gen 2

Removing the Old Battery

Locate the battery pack on the left side of the iPod. It's held in place by two Phillips screws. Carefully remove these screws and set them aside. Now, use the plastic opening tool to gently lift the battery pack out of its placing.

With the battery pack removed, disconnect the battery connector from the logic board by carefully lifting the connector up and away from its socket. Conversely, when installing the new battery, ensure this connector is properly seated.

AD

Installing the New Battery

Befriend your new battery by checking its model number and capacity. It should be a lithium-ion polymer battery with a capacity around 1800mAh to 2100mAh. If it doesn't match these specs, double-check that you've ordered the correct battery.

Orient the new battery correctly before placing it back into the battery pack. The positive terminal should be facing up, towards the logic board. Secure the battery pack to the iPod using the two Phillips screws you removed earlier.

Re-assembling Your iPod

Replace the ribbon cable connecting the screen to the main board, then carefully align and press the back cover onto the front of the iPod. Secure it with the 18 Phillips screws you removed earlier. Ensure all screws are fully engaged to prevent any wobbling.

AD

Once re-assembled, turn on your iPod to ensure the new battery is recognized. Calibrate the battery by fully charging and discharging it a few times to ensure accurate battery life readings.

Now that your iPod has new life, enjoy your music, podcasts, and videos with confidence. Regularly calibrate the battery to maintain its longevity and consider purchasing a protective case to guard against accidental battery depletion or damage. Happy listening!

AD