Step-by-Step Guide: Change Honda CRV Key Fob Battery
Having trouble with your Honda CRV key fob battery? Don't worry, replacing it is a straightforward process that you can do yourself. Follow our comprehensive guide to change the battery in your Honda CRV key fob quickly and easily.
But first, let's make sure you have the right battery for your key fob. For Honda CRV models from 2007 to 2016, you'll need a CR2032 coin cell battery. For models from 2017 onwards, you'll need a CR1632 battery. You can usually find these at electronics stores or online.
Preparation
Before you start, make sure you have the right tools. You'll need a small Phillips head screwdriver, a flathead screwdriver or a coin to use as a prying tool, and your new battery.
It's also a good idea to have a pick or a thin piece of wire to help remove the old battery if it's stuck. Remember, always handle batteries with care to avoid damaging the key fob or causing injury.
Gaining Access to the Battery Compartment
To access the battery compartment, you'll need to pop open the back panel of your key fob. For models up to 2011, you can use a flathead screwdriver or a coin to pry the back panel open. For models from 2012 onwards, you'll need to slide a small Phillips head screwdriver into the hole on the side of the fob and twist to pop open the panel.
Once you've opened the panel, you'll see the battery compartment. It's important to note that the key fob's circuit board may be delicate, so be careful not to bend or damage it when handling the battery.
Removing the Old Battery
Using your small Phillips head screwdriver, remove the screw securing the battery in place. Then, gently use your fingers or a pick to pry the battery out of the compartment. If the battery is stuck, you can use a thin piece of wire to carefully lift it out.
If the battery is badly corroded, you may need to use a bit more force. But be careful not to break the battery or damage the key fob's circuit board.
Installing the New Battery
With the old battery removed, it's time to install the new one. Make sure the new battery is the correct size and has the same orientation as the old one.
Using your fingers or a pick, gently press the new battery into place, making sure it's firmly in contact with the terminals. Then, replace the screw and secure it firmly in place.
Testing the New Battery
Once the new battery is in place, it's time to test it. Try unlocking and locking your car to make sure your key fob is working properly. You should hear the familiar beep and see the lights on your car flash.
If your key fob is working correctly, you're all done! Replace the back panel on your key fob, and you're good to go. If your key fob still isn't working, double-check that the new battery is properly seated and in contact with the terminals.
Congratulations, you've successfully changed the battery in your Honda CRV key fob! Now you can enjoy the convenience of your remote start and keyless entry features for another year or more. If you have any other automotive maintenance questions, be sure to check out our other guides.