Step-by-Step: How to Change Battery in Firestick Remote
Are you tired of your Firestick remote misbehaving or not responding? It might be time to replace the battery. The process is surprisingly simple and only takes a few minutes. In this guide, we'll walk you through the step-by-step process of how to change the battery in your Firestick remote.
Before we dive in, it's important to note that the process is slightly different for the older first-generation remote and the second-generation remote that comes with the Firestick 4K and the Lite edition. Don't worry, we'll cover both. Let's get started.
First-Generation Firestick Remote
The first-generation remote is the one that came with the original Firestick. It has a removable back panel that makes battery replacement a breeze.
Before you begin, make sure you have a new pair of AA batteries ready. We recommend using high-quality, alkaline batteries for optimal performance.
Removing the Back Panel
To access the battery compartment, you'll first need to remove the back panel. Start by pressing the pinhole at the bottom of the remote with a small object like a safety pin or a paperclip. The back panel should pop off easily.
If it's a bit stubborn, don't force it. Angle the object slightly and press harder from an edge, and the panel should come off without any issues.
Replacing the Batteries
With the back panel removed, you'll see the battery compartment. The remote uses two AA batteries, which are inserted with the (+) pole facing up. Remove the old batteries and insert the new ones, making sure they're properly aligned.
Once the batteries are secure, push the back panel back onto the remote and give it a firm press to secure it. Your Firestick remote should now be good to go.
Second-Generation Firestick Remote
The second-generation remote, which comes with the Firestick 4K and the Lite edition, has a more modern design but is just as easy to maintain.
Similar to the first-generation remote, you'll need a new pair of AA batteries. However, this time, you'll also need a small Phillips screwdriver.
Removing the Screws
To access the battery compartment, you'll first need to remove the screws on the back of the remote. Use your Phillips screwdriver to unscrew the eight Phillips screws. They can be a bit tight, so be patient and use steady pressure.
Once you've removed all the screws, set them aside in a safe place. You'll need them to reassemble the remote.
Replacing the Batteries
With the screws removed, you can pry open the back panel with a small object like a plastic card or a coin. Once the back panel is off, you'll see the battery compartment. Insert the new AA batteries with the (+) pole facing up.
Reassemble the remote by aligning the back panel and pressing it back into place. Secure it with the screws you removed earlier. Your Firestick remote should now be working like new again.
Syncing the Remote
After replacing the batteries, you may need to resync your remote to your Firestick. To do this, point the remote at your Firestick and hold down the 'Home' button for 10 seconds. The remote should now be synced and ready to use.
The process is the same for both generations of the remote, so don't be alarmed if the back panel is a bit more secure on the second-generation model. With a little patience and the right tools, you can easily change the battery in your Firestick remote and extend its lifespan.
Remember, regular battery changes will not only ensure that your remote continues to work perfectly but also prevent any annoying issues like rubber banding or slow response. Happy streaming!