how to change battery in apple tv remote 4th generation

Step-by-Step: Change Battery in Apple TV Remote (4th Gen)

By Brian Wilson
AD

Looking to freshen up your Apple TV Remote 4th Generation? Replacing the battery might just be the breath of fresh air you need. Don't let a low-battery warningInterrupt your binge-watching. Here's a simple, step-by-step guide on how to change the battery in your Apple TV remote. Remember, safety first: ensure your remote is turned off and unplugged before starting.

Before we dive in, you'll need a few things: your Apple TV Remote 4th Generation, a this is a CR2032 battery (3V, 230mAh, 62.5 square mm, or its equivalent), and a small coin battery slot (or a quarter to carefully pry it out). Let's proceed.

Understanding Your Remote

Your Apple TV Remote 4th Generation is sleekly designed, but it's a dark horse packed with power. To access the battery compartment, you'll need to remove the back panel. Don't worry, it's reusable, so no need for new housing.

AD
Apple TV Remote Battery Replacement in 2025 (All Models)
Apple TV Remote Battery Replacement in 2025 (All Models)
Lost Your Apple TV Remote? You Don’t Need to Buy Another!
Lost Your Apple TV Remote? You Don’t Need to Buy Another!
How To Fix An Apple TV Remote That Won't Charge - SlashGear
How To Fix An Apple TV Remote That Won't Charge - SlashGear

First, locate the panel on the back of your remote. It's a circular indented area. Now, let's find out how to access it.

Removing the Back Panel

The back panel is securely in place, but removing it is a breeze. Here's how:

[6 Ways] Fix Apple TV remote not charging - Android Nature
[6 Ways] Fix Apple TV remote not charging - Android Nature
Lost Your Apple TV Remote? How to Replace It
Lost Your Apple TV Remote? How to Replace It
  1. Locate the hold switch: This is on the side of your remote. It might be difficult to access, but once you've found it, slide it to the left to unlock your remote.
  2. Remove the panel: Once unlocked, firmly press down on the circular indented area and turn it clockwise. It will take a little force, but it should pop off.

Congratulations, you've successfully removed the back panel! Now, let's move on to replacing the battery.

Replacing the Battery

Now that you've accessed the battery compartment, you'll see the CR2032 battery. Here's how to replace it:

AD
  1. Remove the old battery: Use the coin battery slot (or your quarter) to carefully pry the old battery out. Insert the tool into the indentation and gently lift.
  2. Insert the new battery: Align the new battery with the contacts (the metallic bits). The positive side (+) should be facing up. Gently press it in. It should click into place.
  3. Test your remote: Turn on your Apple TV and test your remote. It should work like a charm!

Reattaching the Back Panel

Now that you've successfully replaced the battery, it's time to reattach the back panel:

Simply align the back panel with the compartment and turn it counter-clockwise until it locks into place. Slide the hold switch back to the right to lock your remote. And there you have it! Your Apple TV Remote 4th Generation is as good as new.

Remember to dispose of your old battery responsibly.achtet on that, enjoy your improved remote experience, and happy streaming!

AD
AD