How to Replace Battery in 2016 Honda CRV Key Fob
If your 2016 Honda CRV's key fob isn't working as it should, it might be time to replace the battery. No worries, it's a straightforward process that you can do at home. Here's a step-by-step guide to help you through it.
Before you start, make sure you have a new CR2032 battery, a flathead screwdriver, and a pair of tweezers. The CR2032 is a common watch battery that you can find at any electronics store or online.
Preparing to Replace the Battery
First, you need to remove the key from your fob. The key is located on one side of the fob, so you should see a small hole where it sits.
To remove the key, insert a flathead screwdriver or a small knife into the hole and gently pry it out. The key should pop out easily. If it's stuck, don't force it as you could damage the fob.
Removing the Back Cover
Once you've removed the key, you'll see a small slot on the side of the fob. This is where you'll insert your flathead screwdriver or a coin to pry off the back cover.
Carefully insert your tool into the slot and twist it slightly to unlock the cover. Then, pull the cover away from the fob. It should come off easily. If it's stuck, gently tap the fob against a hard surface to loosen the cover.
Locating the Battery
With the back cover off, you should see the battery inside the fob. It's secured with a small plastic retainer. Use your tweezers to gently lift the retainer up and out of the way.
Once the retainer is out of the way, you should be able to see the battery. It's held in place with a small clip. Gently lift the clip up to free the battery. If it's stuck, use your tweezers to carefully pry it out.
Replacing the Battery
Now that the old battery is out, it's time to put in the new one. Make sure it's a CR2032 and that the positive (+) side is facing up.
Align the battery with the contacts in the fob and gently push it into place. The clip should snap back into place, securing the battery.
Testing the Battery
Before you put the fob back together, test the battery to make sure it's working. Press the lock and unlock buttons on the fob.
If the lights on the fob flash and the buttons work, your new battery is in good working order. If not, double-check that the battery is correctly aligned and that the clip is securing it properly.
Reassembling the Fob
With the new battery in place and tested, it's time to put the fob back together.
First, replace the battery retainer. Gently slide it back into place until it snaps into position. Then, put the back cover back onto the fob. Line up the edges and press until it snaps into place.
Now that your 2016 Honda CRV's key fob is back in action, you can put it back on your keychain and get back to your day. If you're having any issues or if the battery dies again too soon, it might be time to get your fob professionally checked. Happy driving!