how to change batteries in swiffer wet jet

Easy Steps to Change Batteries in Swiffer WetJet

By Mark Clark
AD

Spring-cleaning your home? The Swiffer WetJet is a game-changer for quick and effective floor cleaning. But when it's time to replace the batteries, don't be caught off guard. Our step-by-step guide will help you change batteries in your Swiffer WetJet effortlessly.

First, let's ensure you have the right type of batteries for your Swiffer WetJet. It requires 4 AA batteries, which are easily available at stores. Now, let's dive into the process of changing these batteries.

Preparation and Battery Removal

Before you start, make sure you have your new batteries and a flat, clean surface to work on. Also, have a trash bin nearby to discard the old batteries.

AD
Changing the Batteries on a Swiffer Wet Jet
Changing the Batteries on a Swiffer Wet Jet
Finally! How to Refill a Swiffer Wet Jet Bottle.
Finally! How to Refill a Swiffer Wet Jet Bottle.
How to Assemble a Swiffer WetJet: Step-By-Step Guide
How to Assemble a Swiffer WetJet: Step-By-Step Guide

To remove the old batteries, follow these steps:

Locating the Battery Compartment

Turn your Swiffer WetJet over so that the bottom is facing up. The battery compartment is located on the bottom side of the device. It's covered by a small, gray or black door with an arrow pointing to the left.

Replacing Swiffer Vacuum Battery
Replacing Swiffer Vacuum Battery
SWIFFER BATTERY REPLACEMENT by FRANK BUTLER, VIRGINIA BEACH, VA
SWIFFER BATTERY REPLACEMENT by FRANK BUTLER, VIRGINIA BEACH, VA

Your Swiffer WetJet comes with a small tool that helps pop open this door. It's stored in a small compartment on the top side of the device, near the trigger button. Use this tool to release the door.

Removing the Old Batteries

Once the door is open, you'll see the battery compartment. You might need to use a flathead screwdriver to carefully pry out the old batteries. They're spring-loaded, so they might pop out slightly.

AD

Using your fingers or needlenose pliers, gently pull the old batteries out. Make sure to discard them properly, following your local waste management guidelines.

Installing New Batteries

Now that the old batteries are out, it's time to insert the new ones. Ensure they're fully charged and placed correctly, with the positive end (+) facing up.

The battery compartment has a diagram showing how to insert the new batteries. It usually looks like this: ( появление батареи ). Make sure to match the diagram when inserting the new batteries.

AD

Inserting the New Batteries

Start by inserting the batteries into the compartment, one at a time. Make sure they click into place. They should fit snugly, with no wiggling. The positive end should face up in each slot.

Once all four batteries are in, use your finger or the included tool to push the door back into place. You should hear it click shut.

Testing Your Swiffer WetJet

Now that you've installed the new batteries, it's time to test your Swiffer WetJet. Turn it back over, and press the trigger button to release some solution. The wet pad should start squirting liquid evenly as you press.

AD

If the Swiffer WetJet works as expected, congratulations! You've successfully changed the batteries. Enjoy your clean floors. If not, double-check that the batteries are inserted correctly and the door is properly closed.

Regularly changing the batteries in your Swiffer WetJet ensures it stays effective and ready for use. Don't forget to keep an extra set of AA batteries handy for when it's time to replace them again. Happy cleaning!

AD