how to change bathtub knobs

How to Change Bathtub Knobs

By Thomas Martin
AD

Is your bathtub looking a little worse for wear? Perhaps it's time for a quick and easy update. Changing bathtub knobs is a simple DIY project that can significantly upgrade your bathroom's look and feel. Follow our comprehensive guide to master the process and give your bathtub the facelift it deserves.

Before you begin, gather your tools and decide on your new knob style. This can be a great opportunity to add a touch of elegance, modernity, or even a unique pops of color to your space. Once you have everything you need, let's dive into the step-by-step process.

Preparation and Tools

To start, ensure your new knobs are compatible with your current hardware. Most knobs are universal, but it's always a good idea to double-check. Next, gather your tools. You'll typically need a screwdriver, an adjustable wrench, Teflon tape, and possibly a drill, depending on your specific project.

AD
Video (longer version): Replace a Bathtub Faucet Handle
Video (longer version): Replace a Bathtub Faucet Handle
how to upgrade your push pull faucet
how to upgrade your push pull faucet
How to clean bathroom knobs
How to clean bathroom knobs

Preparation is also about creating a safe and clean workspace. Lay down a towel or drop cloth to protect your floors, and ensure your bathtub and faucet area is free of any obstacles or clutter.

Tools for the Job

Here's a quick rundown of the tools you might need:

Client Challenge
Client Challenge
How to replace bathtub faucet handles
How to replace bathtub faucet handles
  • Screwdriver - Most likely a Phillips-head screwdriver, but this can vary.
  • Adjustable Wrench - To loosen and tighten supply lines and connections.
  • Teflon Tape - To create a watertight seal around threads.
  • Drill (optional) - If you need to create larger holes for new hardware or install a shower diverter valve.
  • Drop Cloth or Towel - To protect your floors from water and debris.

Safety and Workspace Preparation

Before you start, turn off the main water supply to your bathroom. This is usually located near your water heater or underneath your bathroom sink. Once the water is off, open the faucet to drain any remaining water from the lines.

Safety also involves minimizing potential damage to your floor and surrounding area. Lay down a towel or drop cloth, and ensure your workspace is clean and clutter-free. This will make the job easier and help protect your flooring.

AD

Removing Old Knobs

Now that you're prepared, let's start by removing the old knobs. Begin by turning the water supply back on to check if there are any leaks around the connections. If everything is good to go, turn the water back off and follow these steps:

Identify and Remove Shrouds

The first step is to remove any shrouds or covers that might be hiding the screws you need to access. These often snap off, but you can usually press them gently with a flathead screwdriver to pop them off. If they're stuck, try using a sharp knife to carefully pry them off.

Remove the escutcheon and Screws

Using your screwdriver, remove the screws holding the handle in place. The escutcheon, or the plate around the handle, may also have screws that need to be removed. This will allow you to access the handles securely and remove them.

AD

Once you've removed the screws, carefully lift the handles off. Be mindful of the position of the handles, as they'll need to go back on in the same arrangement.

Installing New Knobs

Now that your old knobs are off, it's time to install the new ones. Start by cleaning the area where the new knobs will be installed. This will ensure a smooth and secure fit. Then, follow these steps:

Prepare the Area

Use a mild soap and water solution to clean the area thoroughly, then dry it completely to prevent any residue from interfering with the fit of your new knobs. If your new knobs are larger or smaller than the old ones, you may need to enlarge or reduce the holes. Use a drill bit slightly larger than the new knob's size to create the perfect fit.

AD

Install the New Knobs

Start by wrapping Teflon tape around the thread of the handle on the water supply lines. This will create a watertight seal and prevent leaks. Next, carefully thread the new handle onto the water supply lines, ensuring they're facing the correct direction (hot on the left, cold on the right).

Once the handles are on, secure them with the screws you removed earlier. If your new knobs didn't come with screws, you can use the old ones. Just be sure they're long enough to secure the new knobs tightly. Finally, reattach the escutcheon and shrouds if your new hardware includes them.

Test and Fine-Tune

Turn the water supply back on and slowly open both cold and hot water valves. Check for any leaks around the handles and connections. If everything is tight, you're all set! If not, turn the water back off, tighten any leaks, and test again.

If your new knobs feel too tight or too loose, you can adjust the pinch valve behind the spout of your faucet. Loosen or tighten as needed, then test again until you've got the perfect balance.

And there you have it! With a little elbow grease and the right tools, you've successfully changed your bathtub knobs and added a fresh touch to your bathroom. Now, sit back and enjoy your updated space. Next time you want to update another part of your bathroom, remember this guide and tackle it with confidence.

AD