how to change atv tire at home

Mastering ATV Tire Replacement: Step-by-Step At-Home Guide

By Christopher Martinez
AD

Changing an ATV tire at home can seem daunting, but with the right tools and techniques, it's a task well within reach. Whether you've punctured a tire on a trail or simply need to upgrade, this guide will walk you through the process step by step. Let's dive in and get your ATV back on the road in no time.

Before starting, gather your tools: a jack, a lug wrench, a wheel wedges or bricks, gloves, and your new tire. Ensure you're working on a stable, level surface, and engage your ATV's parking brake. Now, let's get rolling!

Preparation and Removal of the Damaged Tire

Begin by loosing the lug nuts on the tire using your lug wrench. Counterclockwise is the standard direction. Just push down firmly on the wrench handle; you don't need to remove them completely yet.

AD
How to Change ATV Tires Yourself at Home!
How to Change ATV Tires Yourself at Home!
ATV Tire Repair
ATV Tire Repair
Change ATV UTV Tires at home The EASY way
Change ATV UTV Tires at home The EASY way

Locate your ATV's jack point – usually near the rear of the fender well – and place your jack underneath. Slowly lift the vehicle until the tire is off the ground. For added safety, use wheel wedges or bricks to secure the ATV and prevent it from rolling.

Complete Lug Nut Removal and Tire Deflation

Now, with the tire off the ground, remove the lug nuts the rest of the way by turning counterclockwise again. Place them in a safe spot to prevent losing them. Next, deflate the tire using the tire's sidewall valve. Replace the valve cap to keep debris out.

How to change A Lawn Mower ATV 4 Wheeler Tire Using A Harborfreight Mini Tire Changer video
How to change A Lawn Mower ATV 4 Wheeler Tire Using A Harborfreight Mini Tire Changer video

Once fully deflated, place the lug wrench on the tire's rim and pull outwards to break the tire's seal from the rim. You may need to use some force, but be careful not to damage the rim. Remove the tire completely from the ATV.

Mounting the New Tire

Begin by placing the new tire on the hub, positioning it exactly like the old one. Start replacing the lug nuts by hand, using the top hole first to balance the weight. Tighten them as much as you can, going counterclockwise around the tire.

AD

Once all lug nuts are on, lower the vehicle using the jack until the tire touches the ground but isn't fully on. Give the lug nuts another full turn using the wrench, then lower the vehicle completely. Finally, give the lug nuts one last turn, this time tightening them firmly.

Inflating and Finishing Up

Check your owner's manual for the correct tire pressure and inflate your new tire accordingly. Use a foot-pound gauge for accuracy. Remember, you can always add more air, but overinflating can damage the tire or cause a rough ride.

Once properly inflated, give the lug nuts another check, ensuring they're tight. Take your ATV for a short test drive on a flat surface to ensure the new tire is balanced and seated correctly. If everything feels good, you're all set!

AD

Changing an ATV tire at home doesn't have to be a hassle. With these steps under your belt, you're ready to tackle any flat tire situation. Happy trails, and remember to always prioritize safety in your ATV adventures!

AD