How to Replace Arlo Doorbell Battery
Ever found yourself in need of a quick battery change for your Arlo Doorbell but unsure of where to start? Fret not; we've got you covered. We'll guide you through the process of changing your Arlo Doorbell battery in a simple, step-by-step manner.
As Arlo Doorbells are wireless, they rely on batteries to function. The built-in rechargeable battery is designed to last for several months, but once it's time for a change, you'll want to ensure you're doing it correctly to maintain your doorbell's optimal performance.
Understanding Your Arlo Doorbell Battery
Before we begin, let's quickly familiarize ourselves with the battery inside your Arlo Doorbell.
The Arlo Doorbell uses a lithium-ion battery, which is rechargeable and provides plenty of power for your doorbell to function properly. The battery's capacity is 2300 mAh, and it's designed to last for several months with normal use before needing a recharge.
Checking Your Battery Level
Before you start, it's a good idea to check your battery level to confirm that it needs changing. Here's how:
- Open the Arlo app on your smartphone.
- Tap on the devices tab at the bottom of your screen.
- Select your Arlo Doorbell from the list of devices.
- Your battery level will be displayed at the top right corner of the screen.
Understanding Battery Lifecycle
Knowing some key points about the battery lifecycle can help you plan for future battery changes.
- The first several charge cycles may take longer than subsequent charges, so don't be alarmed if your initial charge takes a few hours.
- Over time, your battery's capacity may decrease slightly, leading to shorter intervals between charges.
- The lithium-ion battery in your Arlo Doorbell should last for hundreds of charge cycles before needing a replacement.
Preparing for Battery Replacement
Once you've confirmed that your battery needs replacing, it's time to gather your tools and prepare for the replacement process.
You won't need any special tools for this process; just make sure you have the following:
- The new battery (Arlo recommends using Arlo-branded batteries for optimal performance).
- A flathead screwdriver (to release the battery tray).
- Gloves (to protect your hands from any battery liquid).
Safety Tips
Before you begin, let's go over a few safety tips to ensure a safe and hassle-free battery replacement:
- Always handle batteries with care to avoid breaking the internal seals, as this could cause a leak.
- Never leave a battery charging overnight or for extended periods, as this can cause it to overheat and potentially start a fire.
- Keep batteries away from extreme temperatures, sharp objects, and metals.
Powering Down Your Arlo Doorbell
Before you can access the battery, you'll need to power down your Arlo Doorbell. Here's how:
- Press and hold the button on the front of your Arlo Doorbell for about 10 seconds until the status light starts blinking rapidly.
- Release the button, and the doorbell will shut down.
Replacing Your Arlo Doorbell Battery
Now that your Arlo Doorbell is powered down, it's time to replace the battery. Let's walk through the steps together.
Note: The process may vary slightly depending on your Arlo Doorbell model, but the general steps will be similar.
Removing the Battery Tray
The battery tray holds the battery in place and shields it from the elements. Here's how to remove it:
- Using a flathead screwdriver, gently pry out the battery tray release tab located at the bottom of your Arlo Doorbell.
- Push the tray release tab into the cite, and the battery tray will pop out.
Removing the Battery
Now that the battery tray is out, it's time to remove the old battery. Here's how:
- Press the battery release button on the side of the battery tray.
- The battery will pop out slightly; gently grasp it and pull it out of the tray.
Inserting the New Battery
Before inserting the new battery, make sure it's the correct type (Arlo uses lithium-ion rechargeable batteries). The battery should have the words "Arlo" or "Arlo Doorbell Battery" printed on it.
- Slide the new battery into the battery tray, making sure the positive (red) end faces up.
- Press the battery gently until you hear a click, indicating that the battery is securely locked into place.
Reinstalling the Battery Tray
With the new battery securely in place, it's time to reinstall the battery tray:
- Line up the battery tray with the bottom of your Arlo Doorbell, making sure the release tab slots into its designated area.
- Press the battery tray gently until it clicks into place.
Powering Up Your Arlo Doorbell
Now that the battery is replaced, it's time to turn your Arlo Doorbell back on:
- Press and hold the button on the front of your Arlo Doorbell for about 10 seconds until the status light starts blinking slowly.
- Release the button, and your Arlo Doorbell will begin to boot up.
Testing Your Arlo Doorbell
After your Arlo Doorbell has booted up, it's a good idea to test it to ensure everything is working properly:
- In the Arlo app, tap on the devices tab at the bottom of your screen.
- Select your Arlo Doorbell from the list of devices.
- Press the test button, which will ring the chime and trigger a notification on your phone.
- If everything is working as expected, you've successfully replaced your Arlo Doorbell battery!
Congratulations on successfully changing your Arlo Doorbell battery! Staying on top of battery maintenance ensures that your doorbell will continue to provide reliable service and keep you connected. If you have any further questions or need additional assistance, don't hesitate to reach out to Arlo's friendly customer support team. Happy doorbelling!