how to change an expansion tank

How to Change an Expansion Tank

By Michael Williams
AD

Changing an expansion tank may seem like a daunting task, but with the right guidance, it's a manageable project for even the most amateur DIY enthusiasts. Expansion tanks, an essential component of your home's water heating system, play a crucial role in preventing excessive pressure from building up in your plumbing. So, it's imperative to know how to replace one when it's time to do so. This comprehensive guide will walk you through the process step by step.

Before we dive into the process, let's briefly touch on when you might need to change your expansion tank. Typically, expansion tanks last for around 5-10 years, but this can vary based on water quality and usage. You may need to replace it earlier if you notice signs like water leaks, strange noises, or significantly reduced hot water supply. Now, let's get started with the actual replacement process.

Preparation and Safety Precautions

Safety should always be your top priority when working with any type of plumbing. Before you begin, familiarize yourself with the location of your main water shut-off valve. During the process, you'll need to turn off the water supply to prevent any accidents.

AD
How to Install a Expansion Tank on Water Heater
How to Install a Expansion Tank on Water Heater
an old water heater is shown in this image
an old water heater is shown in this image
How to Install Expansion Tank on Boiler
How to Install Expansion Tank on Boiler

Also, gather all the necessary tools and materials. You'll typically need a screwdriver, a wrench, a bucket, and of course, a new expansion tank. Make sure you've picked one that's compatible with your water heater model and meets local building codes.

Locating the Expansion Tank

The expansion tank is usually located near your water heater, often attached to it or installed on the same pipe. If you're unsure, consult your home's blueprint or look for a tank shaped like a small upright drum with two pipe connections.

How to Clean a Expansion Tank | 8 Easy Steps (2026)
How to Clean a Expansion Tank | 8 Easy Steps (2026)
Water Heater Expansion Tanks — What They Are and Why You Need One
Water Heater Expansion Tanks — What They Are and Why You Need One

Once you've found it, mark its location clearly. This will help you position the new tank correctly when the time comes.

Draining the System

With everything in place, it's now time to drain your water heater to release the pressure and empty it of hot water. Start by turning off the power to your water heater, either at the circuit breaker or the fuse box.

AD

Next, locate the drain valve at the bottom of your water heater. Connect a hose to it and run the other end towards a suitable drain location, like a laundry tub or outdoors. Open the valve slowly and allow the water to drain completely. This process may take a while, so be patient.

Removing the Old Expansion Tank

With the system drained, it's finally time to remove the old expansion tank. Position your bucket underneath it to catch any remaining water.

Begin by unscrewing the two bolts that connect the tank to the pipes. Wiggle the tank gently to loosen it, and then pull it off the pipe fittings. If you've drained the system properly, this should come off easily.

AD

Purging the Air and Installing the New Tank

Before installing the new tank, you'll need to purge the air from the lines. This is necessary to prevent any air locks from forming, which can hinder your water heater's performance.

Attach a garden hose to your water supply line and open the nearest faucet. This will force the air out of the lines. Once water starts coming out of the faucet, you're ready to install your new expansion tank.

Connecting the New Tank

Position the new tank in place, making sure it's aligned with the marks you made earlier. Reattach the two bolts and tighten them securely to fix the tank to the pipes.

AD

Now, turn your water supply back on and check for any leaks around the tank. If everything looks good, you can then turn your water heater back on and start enjoying your hot water again.

Performing a System Pressure Test

After installing the new expansion tank, it's a good practice to perform a pressure test on your system. This helps ensure that the replacement was successful and that there are no leaks in your plumbing.

You can hire a professional plumber for this task, or you can do it yourself using a pressure gauge. Simply attach the gauge to the city water supply valve and turn the water on slowly. The pressure should read between 50-80 PSI. If it reading is much less, you may have a leak somewhere in your system.

Congratulations! You've now successfully replaced your expansion tank. Regular maintenance and checks on your water heater and expansion tank will ensure they serve you well for years to come.

AD