how to change a water filter on whirlpool refrigerator

Easy Steps: Switch Out Your Whirlpool Refrigerator Water Filter

By Sarah Robinson
AD

Ever noticed a decrease in water pressure from your Whirlpool refrigerator's dispenser? It might be time to replace your water filter. Regular filter changes ensure fresh, clean water, and maintain optimal dispenser performance. Here's a step-by-step guide on how to change a water filter on your Whirlpool refrigerator, making the process easy and efficient.

Before we begin, ensure you have a new Whirlpool EveryDrop or equivalent water filter at hand. These filters are designed to suit your refrigerator model, ensuring optimal performance and water quality. Let's dive into the process.

Locating the Water Filter

Your Whirlpool refrigerator's water filter is typically located behind the bottom access panel or in the fresh food compartment. The exact location varies by model, so consult your user manual for precise information. Once you've found it, you're ready for the next step.

AD
a person is holding an electric toothbrush in front of a water filter
a person is holding an electric toothbrush in front of a water filter
How To Change Ice Maker Filter On Whirlpool – Storables
How To Change Ice Maker Filter On Whirlpool – Storables
How to change the water filter in a Whirlpool refrigerator
How to change the water filter in a Whirlpool refrigerator

Most Whirlpool refrigerators use a push-in/push-out filter system. Don't worry; it's as simple as it sounds. Let's talk about removing the old filter first.

Removing the Old Filter

Before you start, make sure to turn off the refrigerator's water dispenser to prevent any leaks. Then, follow these steps to remove the old filter:

Do Whirlpool Refrigerators Have Water Filters? [And When To Replace Them]
Do Whirlpool Refrigerators Have Water Filters? [And When To Replace Them]
How to Replace the Filter on a Whirlpool Refrigerator | Filter 3 Replacement
How to Replace the Filter on a Whirlpool Refrigerator | Filter 3 Replacement
  1. Open the filter housing cover and locate the release button, usually at the top of the filter.
  2. Press and hold the release button while slowly turning the filter counterclockwise. It should turn smoothly and come out with a slight push.
  3. If your model has a filter status indicator light, reset it by pressing and releasing the light's button once the old filter is out.

Now that the old filter is out, let's move on to installing the new one.

Installing the New Filter

With the old filter removed, it's time to install the new one. Follow these steps for a smooth process:

AD
  1. Moisten the new filter in cold water for about 5 seconds to remove any Manufacturing dust and to prepare the filter for use.
  2. Align the filter with the opening in the filter housing, ensuring the arrow on the filter points towards the refrigerator.
  3. Press the filter firmly and evenly into the housing until it clicks into place. It might take a little force, but it should go in smoothly.
  4. With the filter securely in place, recycle the old filter according to local regulations.
  5. After installation, run water through the dispenser and icemaker a few times to activate the new filter. You may notice some initial discoloration or odor, which is normal and will dissipate once the filter is fully activated.
  6. Lastly, confirm that the filter status indicator light shows "Replace" and press and release the light's button to reset it.

Congratulations! You've successfully changed your Whirlpool refrigerator's water filter. It's now time to enjoy fresh, clean water from your dispenser and icemaker for the next 6 months or 200 gallons, whichever comes first.

Regular filter changes are crucial for maintaining the quality and safety of your drinking water. Keep an eye on your filter status indicator light, and don't miss the 6-month or 200-gallon mark to ensure optimal performance. Cheers to crystal-clear, fresh water!

AD