how to change a washing machine belt

Step-by-Step: How to Change a Washing Machine Belt

By John Allen
AD

Got a washing machine with a few too many spins in it? That's likely the old belt causing the chaos. Replacing it with a new one is easier than you think. Let's dive in and guide you through the process of how to change a washing machine belt.

Before we start, ensure you have the right belt for your specific model. Check your owner's manual or use the model number to find the appropriate belt. Safety first! Unplug your washer, turn off the water supply, and let the machine sit for a few minutes to release pressure.

Preparation and Disassembly

The first step is to prep your workspace and disassemble your washing machine. Clear out the area around the washer and gather your tools - a screwdriver (usually Phillips), a putty knife, and your new belt.

AD
The Hidden Signs Your Washing Machine Belt Needs Replacing
The Hidden Signs Your Washing Machine Belt Needs Replacing
Changing a washing machine belt
Changing a washing machine belt
How to fit a washing machine belt
How to fit a washing machine belt

Remove the back panel of the washer. Most machines have it held in place by screws or clips. Once you've loosened them, carefully pry the panel off using the putty knife. Be gentle, you don't want to damage the panel or any surrounding parts.

Accessing the Belt

Now it's time to expose the belt. You'll need to remove some shrouds or covers to see the belt and the motor pulley. Use your screwdriver to remove any screws holding these in place. Again, be gentle, as these parts can break easily.

How To Change A Washing Machine Belt – Storables
How To Change A Washing Machine Belt – Storables
How to Replace the Belt on a Bosch Washing Machine
How to Replace the Belt on a Bosch Washing Machine

Once the shrouds are off, you should see the belt running between the motor pulley and the transmission. You might need to move the upper portion of the washer tub slightly to release the belt tension. Some models may require loosening a setscrew on the motor pulley to release the belt.

Removing the Old Belt

Identify where the old belt is cracked, frayed, or worn. This is usually where it rubs against the motor pulley or transmission. Use your putty knife to carefully pry the belt off these pulleys. It might take a bit of wiggling, but it should come free.

AD

If the belt is tight, you might need to use a belt removal tool or improvise one using a flathead screwdriver and some pliers. Once the belt is off, discard it and get ready for the new one.

Installing the New Belt

Start by routing the new belt over the motor pulley. Make sure it's properly seated and aligned. Then, slip the belt over the transmission pulley. Again, ensure it's correctly aligned and seated.

After both pulleys have the belt, you might need to re-tension it. Look for a setscrew on the motor pulley. When you tighten this screw, it will pull the belt taut. Make sure the belt is not too tight (check manufacturer's guidelines) as this can damage the motor.

AD

Reassembling the Washer

Now that the belt is in place and properly tensioned, it's time to put everything back together. Start by reattaching the shrouds or covers. Ensure they're correctly aligned and secure them with screws. Pop the back panel back on and secure it as well.

Before plugging the washer back in, turn the water taps back on and let the hoses fill the machine slightly. This helps prevent airlocks and ensures the machine is ready to run. Plug the washer back in and give the belt a test run.

Final Checks and Wrap-up

Listen to the washer as it runs. The belt should quietly revolve around the pulleys, with no excessive noise or vibration. If the washer is running smoothly, you're good to go. If not, you might need to readjust the belt tension or check for any other issues.

AD

Congratulations, you've successfully learned how to change a washing machine belt! Remember, regular maintenance and checking your washer's belts can extend the life of your appliance. Happy washing!

AD