how to change a pentair pool filter

Step-by-Step: How to Change a Pentair Pool Filter

By Christopher Walker
AD

Changing a Pentair pool filter is a crucial maintenance task to ensure your pool's water remains clean, healthy, and crystal clear. However, it can seem daunting if you've never done it before. Don't worry, we've broken down the process into simple steps to make it easy and stress-free. Soon, you'll be a pro at maintaining your pool sanitation system.

Before we dive into the step-by-step guide, remember that safety should always be your top priority. Always ensure the pump is off and the filter is clean and dry to prevent any electrocution risks or messiness. Now, let's get started.

Gathering Your Equipment and Preparing the Filter

First, you'll need to gather your tools. You'll need a screwdriver, a new pool filter cartridge, and a good(old-fashioned) pair of gloves to protect your hands from any debris. Next, prepare your filter by turning off the pool pump and opening the air relief valve at the top of the filter. This valve is usually located on the multi-port valve.

AD
How To Clean a Pentair Pool Cartridge Filter [ Step by Step ]
How To Clean a Pentair Pool Cartridge Filter [ Step by Step ]
there are four blue hoses in the bucket
there are four blue hoses in the bucket
a person is using a pressure gauge on a lawn mower
a person is using a pressure gauge on a lawn mower

After the air is relieved, close the valve and open the multi-port valve to the 'waste' or 'neutral' position. Then, attach a garden hose to the waste port and turn on the hose to drain the filter tank. This step relieves the pressure inside the filter and makes it easier and safer to remove the old cartridge.

Removing the Old Cartridge

Locate the clamp band on the side of the filter and loosen it using a screwdriver. Once the band is loose, swing it open and set it aside. Now, carefully pull the old cartridge out of the tank. You might need to use a bit of force, but be gentle to avoid damaging it.

How to Clean a Pool Cartridge Filter System
How to Clean a Pool Cartridge Filter System
How to Clean a Pool Filter to Lower Energy Bills
How to Clean a Pool Filter to Lower Energy Bills

If your pool filter is dirty, you'll be glad you wore gloves. Don't worry about the mess, though. It's all part of the process. Just remember to clean up safely and responsibly when you're done.

Cleaning the Filter Tank

The old cartridge leaves behind debris, so it's essential to clean the tank thoroughly before installing the new one. Use aFilter Cleaner to blast away any remaining dirt or debris. You can also use a high-pressure nozzle on your hose to rinse the tank.

AD

While cleaning, take a moment to inspect the tank for any cracks or damage. If you find any, it might be time to replace the tank. Remember, pool safety starts with maintenance, so always keep an eye out for potential issues.

Installing the New Cartridge and Reassembling the Filter

Now that your filter tank is clean and dry, it's time to install the new cartridge. First, lightly spray the new cartridge with a high-quality pool filter cleaner to help it absorb oil and grease from the pool water. Then, insert the cartridge into the tank, ensuring it's properly seated and facing the right direction.

If your pool has a separate o-ring, make sure to lubricate it with a bit of pool filter lubricant before placing it on the lip of the cartridge. Then, carefully align the cartridge with the tank and push it in until it's fully seated.

AD

Reinstalling the Clamp Band and Priming the Filter

Once the new cartridge is in place, replace the clamp band and secure it with the screwdriver. Make sure it's tight enough to create a proper seal but not so tight that it damages the cartridge or the tank.

Before turning the pump back on, prime the filter. To do this, open the air relief valve again and slowly pour water into the filter until it reaches the top of the cartridge. Close the valve and turn the multi-port valve back to the 'filter' position.

Turning the Pump Back On and Monitoring the System

Now that everything is back in place, it's time to turn the pump back on. Start with the filter valve in the 'rinse' position to ensure any air left in the system can escape. After a few minutes, turn the valve back to the 'filter' position.

AD

Finally, keep an eye on your pool's filter pressure gauge. As the filter runs, the pressure will build up. This is normal. However, if the pressure becomes too high, it might be time to clean or replace the cartridge again. Always follow the manufacturer's guidelines for pressure levels and cartridge life spans.

And there you have it! You've just successfully changed your Pentair pool filter. Regular maintenance like this is key to keeping your pool water clean and your pool equipment running smoothly. Don't forget to add pool filter cleaning to your regular maintenance routine, and your pool will be the envy of the neighborhood in no time. Happy swimming!

AD