how to change a headlight bulb on a chevy equinox

How to Change a Headlight Bulb on a Chevy Equinox

By Hannah Brown
AD

If your Chevy Equinox's headlights have dimmed or gone out completely, it might be time to change the headlight bulbs. Don't worry, this is a straightforward task that you can handle yourself with just a few tools and a little patience. Here's a comprehensive guide on how to change a headlight bulb on a Chevy Equinox.

Before we start, ensure you have the correct bulbs for your vehicle. The Chevy Equinox uses a 9005 bulb for the high beam and a 9006 for the low beam. It's also a good idea to work in a well-lit area, either during the day or with a flashlight, to make the process easier and safer.

Preparation and Accessing the Headlights

The first step is to gather your tools and prepare your vehicle for the job.

AD
How to Replace Headlight Bulbs 10-17 Chevy Equinox
How to Replace Headlight Bulbs 10-17 Chevy Equinox
How To Replace Headlight Assembly 05-09 Chevy Equinox
How To Replace Headlight Assembly 05-09 Chevy Equinox
How to Replace Headlights 10-17 Chevy Equinox
How to Replace Headlights 10-17 Chevy Equinox

You'll need:

  • A 10mm socket wrench or a flathead screwdriver.
  • New headlight bulbs (9005 for high beam and 9006 for low beam).
  • Work gloves to protect your hands from heat.
  • Optional: a Something to help you remove the rubber backing from the electrical plug, like a small fork or a string of dental floss.

Once you have your tools, park your vehicle in a safe, well-ventilated area, and let the engine cool to prevent any burns.

How To Replace A Headlight Bulb (Sponsored by STP)
How To Replace A Headlight Bulb (Sponsored by STP)
a person is cleaning the engine of a car
a person is cleaning the engine of a car

Opening the Hood and Locating the Headlights

Start by opening the hood of your Chevy Equinox. The headlights are located behind a plastic cover that snaps into place. To remove this cover:

1. Look for two small tabs on either side of the headlight. These tabs snap into place when the cover is closed.

AD

2. Using your fingers, gently push the tabs inward and pull the cover away from the headlight.

Removing the Old Bulb

With the cover removed, you can now access the back of the headlight bulb.

1. Before you start, make sure you have turned off the ignition to prevent any electrical shorts.

AD

2. Locate the electrical plug at the back of the headlight bulb. Gently pull the rubber backing away from the plug. If it's too tight, use a small fork or dental floss to wiggle it free.

3. There should now be a black plastic cap covering the bulb's metal base. Twist this cap counterclockwise to release it. You might need to use a 10mm socket wrench or a flathead screwdriver to help you turn it.

4. Once the cap is loose, gently pull the old bulb straight out of the headlight socket. Be careful not to touch the glass part of the bulb with your fingers as the oil can cause the bulb to malfunction.

AD

Installing the New Bulb

Now that you've removed the old bulb, it's time to install the new one. Here are the steps to follow:

1. Remove the new bulb from its packaging, but don't touch the glass part yet. The new bulb comes with a protective plastic film. Leave this on until you're ready to install the bulb.

Installing the Bulb

1. With the old bulb removed, take the new bulb and line up the grooves on the metal base with the slots on the headlight socket.

2. Gently push the bulb into the socket until the metal base is flush with the back of the socket.

3. Once the bulb is fully seated, twist the black plastic cap clockwise to secure it. Be careful not to overtighten. finger tight is usually sufficient.

Reattaching the Electrical Plug

1. Now that the bulb is secured, gently push the rubber backing on the electrical plug back into place.

2. Ensure that the plug is fully seated and secure. The rubber backing should snap into place.

Final closing thought:

Congratulations, you've successfully changed the headlight bulbs on your Chevy Equinox! Always remember to test your new bulbs immediately after installation to ensure they're working correctly. Safe driving!

AD