how to change a hacksaw blade

How to Change a Hacksaw Blade

By Olivia Thomas
AD

Limited on budget or don't want to buy a new tool for a one-off job? Then you've likely found yourself asking, 'How to change a hacksaw blade?'. Thankfully, this task is straightforward enough to tackle on your own. Let's delve into the process, ensuring you're safe and efficient throughout.

Before we jump in, ensure you've got a few safety measures in place. This includes gloves to protect your hands, safety glasses to shield your eyes, and maybe even ear protection, depending on how noisy your work environment is. With that taken care of, let's look at the steps involved.

Preparation and Removal of the Old Blade

Starting this process right involves preparation. Ensure your workspace is clean and well-lit. Then, grab your hacksaw and examine the old blade. This step identifies the type of blade you're dealing with, making replacement easier.

AD
How to change a hacksaw blade? - Wonkee Donkee Tools
How to change a hacksaw blade? - Wonkee Donkee Tools
Hacksaw Blade Direction. How to Change/Install the Blade?
Hacksaw Blade Direction. How to Change/Install the Blade?
a person using a circular saw to cut wood
a person using a circular saw to cut wood

Removing the old blade is simple, especially if it's worn out or broken. To begin, relax the locking mechanism at the end of the saw's frame. This usually involves unscrewing a knob or releasing a catch. Once done, pull the old blade out. Be cautious during this stage; broken blades can cause injuries if mishandled.

Identifying Blade Type

Hacksaws use two types of blades: standard and junior. Junior blades are smaller, around 5 inches in length, while standard blades measure approximately 12 inches. Each type fits specific saw frames, so identifying yours is crucial.

How to change a junior hacksaw blade? - Wonkee Donkee Tools
How to change a junior hacksaw blade? - Wonkee Donkee Tools
Figure 1-15.Installing a hacksaw blade
Figure 1-15.Installing a hacksaw blade

Junior blades usually have a square end and hook into a groove in the saw frame, held in place by a pin or a plug. Standard blades are wider and fit perpendicularly into a slot in the frame, secured in place by a thumb screw or a nut and bolt assembly.

Choosing a Replacement Blade

Once you're aware of your blade type, choose a replacement. Hacksaw blades are available in various materials: bi-metal, steel, and high-speed steel. Bi-metal blades are the most common, as they're tough and last longer. Steel blades are cheaper but also less durable, and high-speed steel blades are ideal for cutting metal but are quite expensive.

AD

Beyond material, consider the blade's teeth. Coarse teeth are great for cutting metal, while fine teeth are perfect for wood. Lastly, confirm the blade's size matches your hacksaw, then buy accordingly.

Installing the New Blade

Now that you've got your new blade, let's install it. If you're using a standard blade, you'll first need to loosen the securing mechanism in the hacksaw. For a thumb screw, unscrew it; for a nut and bolt, loosen the nut.

The process for installing a junior blade is similar but varied. You'll need to release the locking mechanism, hook the blade in, and secure it by re-engaging the locking mechanism.

AD

Inserting the Blade

With the hacksaw secured and ready to accept the new blade, insert it correctly. For standard blades, hold the new blade against the slot in the hacksaw's frame and slide it in. For junior blades, hook the blade into the groove and make sure it sits securely against the pin or plug.

Be precise during this step. Incorrect installation can lead to poor cutting results or even damage the blade, leading to accidents. Never force the blade in; if there's resistance, double-check your actions and make sure you're doing everything correctly.

Securing the New Blade

After the blade is in place, secure it. For standard blades, this means re-tightening the securing mechanism. For thumb screws, firmly re-secure it; for nut and bolt secured blades, remember to adequately tighten the nut while being sure not to over-tighten and damage the threads.

AD

With junior blades, firmly re-engage the locking mechanism. Be careful while doing so. Applying too much pressure can cause the mechanism to break, requiring replacement of the entire hacksaw.

Congratulations! You've now successfully changed your hacksaw blade. Always remember that with great tools comes great responsibility. Ensure you handle and use your hacksaw safely, and always clean it and store it properly when not in use.

AD