how to calibrate switch pro controller

How to Calibrate Nintendo Switch Pro Controller

By Mark Jackson
AD

Are you facing issues with your Nintendo Switch Pro Controller's responsiveness or calibration? Don't worry, you're not alone. Calibration can help resolve these problems and keep your gaming experience smooth and enjoyable. Here's a step-by-step guide on how to calibrate your Switch Pro Controller, ensuring perfectly responsive gameplay.

Before we dive into the calibration process, let's ensure your controller's firmware is up to date. To do this, connect your controller to your Nintendo Switch and go to 'System Settings' > 'System' > 'Update Controller'. Now, let's proceed with the calibration process.

Understanding the Calibration Process

The Switch Pro Controller calibration process involves three steps: Removing Drift, Calibrating the Control Stick, and Calibrating the Gyroscope. Let's tackle each step one by one.

AD
How to Use a Nintendo Switch Pro Controller on PC and Android
How to Use a Nintendo Switch Pro Controller on PC and Android
How You Can Fix a Drifting Pro Controller Stick - Nintendo Switch
How You Can Fix a Drifting Pro Controller Stick - Nintendo Switch
How to use and program your LED modded Pro-Controller
How to use and program your LED modded Pro-Controller

Remember, calibration isn't a one-time fix. Drift may reoccur over time due to normal wear and tear. We recommend checking your controller's calibration periodically or whenever you notice gaming issues.

Removing Drift

Before proceeding with the calibration, let's address stick drift, a common issue that can cause your character to move erratically even when not interacting with the controller. To remove stick drift:

How to Calibrate the Control Sticks on your Nintendo Switch
How to Calibrate the Control Sticks on your Nintendo Switch
How to use a Nintendo Switch Pro controller with a PC
How to use a Nintendo Switch Pro controller with a PC
  1. Ensure your controller's battery is fully charged.
  2. Press the '-/+' buttons simultaneously to access the Input Settings.
  3. Scroll down to 'Change Input Order' and select it.
  4. Follow the on-screen instructions to set each joystick's neutral position and center it.

This process should help significantly reduce or remove stick drift. If the issue persists, proceed to the next step.

Calibrating the Control Stick

Now that we've addressed stick drift, let's fine-tune your controller's stick sensitivity. Here's how to calibrate the control stick:

AD
  1. Go back to the 'Change Input Order' menu.
  2. Scroll down to 'Sensitivity Settings' and select it.
  3. Press '+' to adjust the horizontal sensitivity and '-' to decrease it. Find the balance between responsiveness and smoothness that works best for you.
  4. Repeat the process for vertical sensitivity.

Now, your control stick should be correctly calibrated and provide a responsive gaming experience.

Calibrating the Gyroscope

The Switch Pro Controller's gyroscope allows you to control movements using motions from the controller. If your gyroscope isn't functioning correctly, it might cause unintended movements. To calibrate the gyroscope:

First, make sure the gyroscope feature is enabled in your game's settings. If it is, try the following steps:

AD
  1. Navigate to the 'System Settings' > 'Controllers and Sensors'.
  2. Select 'Gyroscope' and ensure it's turned on.
  3. Place your controller flat on a stable surface, then press and hold the 'R' and 'ZR' buttons simultaneously for about three seconds. TheLEDs on the controller will flash to indicate calibration.
  4. Once the LEDs stop flashing, the gyroscope should be calibrated. Test your game to confirm the calibration.

If your gyroscope still isn't working correctly, consider factory resetting your controller or seeking professional help.

Additional Troubleshooting Tips

If you're still experiencing issues after following these steps, double-check the following:

  • Ensure your controller isn't broken or damaged.
  • Check if your hands are sweaty or greasy, as residual moisture can cause stick drift.
  • Inspect the controlstick's external area for any debris or dirt, which can interfere with the mechanism.

If all else fails, it might be time to invest in a new Switch Pro Controller. Keep in mind that regular use and wear and tear can eventually diminish the lifespan of your controller.

AD

Happy gaming! With your Switch Pro Controller now calibrated and tweaked, you're ready to embark on new adventures and conquer challenges. Don't forget to re-calibrate your controller periodically to maintain optimal performance. Enjoy your gaming experience!

AD