How to Calibrate Samsung Front Load Washer: Step-by-Step Guide
Are you noticing that your Samsung front load washer isn't cleaning your clothes as well as it used to? Or perhaps you've recently installed your washer and want to ensure it's performing at its best? Calibrating your washer is crucial for maintaining its efficiency and longevity. Let's dive into a step-by-step guide on how to calibrate your Samsung front load washer to keep those whites whites and colors bright.
Before we begin, it's important to note that calibration processes may vary slightly depending on your washer's model. However, this guide covers the most common Samsung front load washers.
Preparation for Calibration
Before starting the calibration process, make sure you have the following on hand:
- A unaffected tube or similar device for measuring water depth
- Clear, Lukewarm water (around 60-80°F or 15-27°C)
- Detergent and fabric softener
- Empty pockets on your washer
Clearing the Washer
First, ensure your washer is empty by removing any clothes, nets, or accessories from the drum.
Next, cancel any active cycles or turn off the washer if it's currently running.
Emptying the Water Supply and Drain
To start, you'll need to empty the water supply and drain. Begin by turning off the water supply using the valves behind your washer. Then, disconnect the water hoses from your washer to drain any remaining water.
Once the water hoses have completed draining, reconnect them and turn the water supply back on. Check for any leaks around the connections.
Calibrating the Water Level
Calibrating the water level is crucial for ensuring that your washer uses the right amount of water for each cycle. This helps maintain energy efficiency and reduces the risk of overfilling or underfilling.
To begin, open the washer door, then place your tube or similar device horizontally across the door opening. Ensure the tube is level with the top of the drum.
Testing the Water Level
Next, run a normal delicates cycle (8 lbs) with cold water and no detergent. Once the cycle starts, observe the water level. If it reaches the top of your tube, your water level is already calibrated, and you can proceed to the next step.
If the water level doesn't reach the top of the tube, you'll need to adjust the water level. Consult your user manual for specific instructions on how to do this for your model. After making the adjustment, run the cycle again to test the new water level.
Adding Detergent
Now that your water level is calibrated, run a cycle with 4.5 lbs of clothes, cold water, and detergent. The detergent should create suds that reach the top of your tube. If it doesn't, you may need to adjust your detergent amount or use a fluff cycle first to check if the washer can create the necessary agitation.
Calibrating the Soap Dispenser
To ensure your washer is using the correct amount of detergent, you'll need to calibrate the soap dispenser.
Run a normal cycle with cold water and 4.5 lbs of clothes. After the cycle ends, check the detergent drawer. If no detergent remains in the container, your dispenser is calibrated correctly. If there's still detergent left, you may need to adjust the dispenser. Consult your user manual for specific instructions.
Testing the Fabric Softener Dispenser
Next, run a normal cycle with cold water, 4.5 lbs of clothes, and fabric softener. After the cycle ends, check the fabric softener drawer. Similar to the detergent dispenser, if there's no fabric softener remaining, your dispenser is calibrated correctly. If there's still fabric softener left, adjust the dispenser according to your user manual.
Lastly, run a final cycle ensuring that both the detergent and fabric softener dispensers are releasing the correct amount of product. If all tests pass, your Samsung front load washer is now calibrated for optimal performance.
Regular calibration is key to maintaining your washer's performance and lifespan. Don't hesitate to schedule a service if you encounter any issues during the calibration process. Happy washing!